|
|
Publications
Refereed
Journal Papers:
1.
Abdel-Qader,
I., Abu-Amara, F., and Abudayyeh, O., “Fractals and
Independent Component Analysis for Defect Detection in Bridge Decks,” Journal of Advances in Civil Engineering, Hindawi Publishing Corporation, Volume 2011, Article ID
506464, 2011.
2.
Abudayyeh, O., Barbera
J., Abdel-Qader, I., Cai,
H., and Almaita, E., “Towards Sensor-Based Health Monitoring Systems for Bridge Decks: A
Full-Depth Precast Deck Panels Case Study,” Journal
of Advances in Civil Engineering,
Hindawi Publishing Corporation, Volume 2010,
December, 2010.
3.
Abudayyeh, O., Cai, H., Mellema, B., and
Yehia, S., “Quantifying Time and User Cost Savings
for the Rapid Bridge Construction Technique,” Transportation Research Record (TRR), a Journal of the Transportation
Research Board, Number 2151, Volume 1, 2010.
4.
Yehia, S.,
Abudayyeh, O., Bhusan, B., Maurovich,
M., and Zalt, A., “Self-Consolidating Concrete
Mixture with Local Materials: Proportioning and Evaluation,” Materials Science Research Journal,
Nova Publishers, Volume 3, Issue 1/2, 2009.
5.
Abdel-Qader, I., Yohali,
S., Abudayyeh, O., and Yehia, S., “Segmentation of
Thermal Images for Nondestructive Evaluation of Bridge Decks,” NDT & E International Journal,
Elsevier Publishing Company, Volume 41, Number 5, July, 2008.
6. Yehia, S., Khan, S., and Abudayyeh, O.,
“Recycled Aggregates in Structural Concrete Mixes: Evaluation of Mechanical
Properties” HBRC Journal, International Scientific Journal of the
Housing and Building National Research Center (HBRC), Volume 4, Number 3, December, 2008.
7.
Abudayyeh, O., Yehia, S.,
Abdel-Qader, I., and Zalt,
A., “GPR Imaging for Bridge Deck Condition Assessment,” Journal of Bridge Structures - Assessment, Design and Construction,
Taylor and Francis Publisher, Volume 4, Issue 2, June, 2008.
8.
Yehia, S., Abudayyeh, O., Abdel-Qader,
I., Zalt, A., “GPR,
Chain Drag, and Ground Truth: Correlation of Bridge Deck Assessment Data,” Transportation Research Record (TRR), a Journal of the Transportation
Research Board, Number 2044, 2008.
9.
Yehia, S., Abdel-Qader, I.,
Abudayyeh, O., Zalt, A., and Meganathan,
V., “Evaluation of Sensors Performance
for Concrete Bridge Applications,” Transportation Research Record (TRR), a
Journal of the Transportation Research Board, Number 2050, 2008.
10.
Yehia, S.,
Abudayyeh, O., Fazal, I., and Randolph, D., “A
Decision Support System for Bridge Deck Maintenance,” Journal of Advances in Engineering Software, Elsevier Publishing
Company, Volume 39, Number 3, March,
2008.
11.
Abudayyeh, O., Zidan, S., Yehia, S., and Randolph, D., “A Hybrid Prequalification/
Innovative Contracting Model Using AHP,” Journal of Management in
Engineering, American Society of Civil Engineers, Volume 23, Number 2,
April, 2007.
12. Yehia, S., Abudayyeh, O., Zalt, A., and Bayha, J.,
“Prefabricated Bridge Deck and Superstructure Systems for Rapid Bridge
Replacement,” HBRC Journal, International Scientific Journal of the
Housing and Building National Research Center (HBRC), Volume 3, Number 2, August, 2007.
13.
Yehia, S.,
Abudayyeh, O., Nabulsi, S., and Abdel-Qader, I., “Detection of Common Defects in Concrete
Bridge Decks Using Non-Destructive Evaluation Techniques,” Journal of Bridge Engineering,
American Society of Civil Engineers, Volume 12, Number 2, March, 2007.
14.
Abdel-Qader, I., Parshad-Rad,
S., Abudayyeh, O., and Yehia, S., “PCA-Based
Algorithm for Unsupervised Bridge Crack Detection,” Journal of Advances in Engineering Software, Elsevier Publishing
Company, Volume 37, Number 12,
December, 2006.
15.
Abudayyeh, O., Fredericks,
T., Butt, S., and Shaar, A., “An Investigation of
Management Commitment to Construction Safety,” International Journal of Project
Management, Elsevier, Volume 24, Number 2, February, 2006.
16. Abudayyeh, O., Dibert-DeYoung, A., Rasdorf, W., and Melhem, H.,
“Research Publication Trends and Topics in Computing in Civil Engineering,” Journal
of Computing in Civil Engineering, American Society of Civil Engineers,
Volume 13, Number 1, January, 2006.
17.
Fredericks, T., Abudayyeh, O., Choi, S., Wiersma, M., and Charles, M., “Occupational Injuries and Fatalities in the Roofing Contracting
Industry,” the Journal of Construction Engineering and Management,
American Society of Civil Engineers, Volume 131, Number 11, November, 2005.
18. Abudayyeh, O., Khan, T., Yehia, S., and
Randolph, D., “The Design and Implementation of a Maintenance Information
Model for Rural Municipalities,” Journal of Advances in Engineering
Software, Elsevier Publishing Company, Volume 36, Number 8, Pages
540-548, August, 2005.
19. Abudayyeh, O., Al Bataineh, M., and Abdel-Qader, I., “An Imaging Data Model for Concrete Bridge
Inspection,” Journal of Advances in Engineering Software, Volume 25,
Number 8-9, Pages 473-480, September, 2004.
20.
Abudayyeh, O., Cai, H., Fenves,
S., Law, K., O’Neill, R., and Rasdorf, W., “An
Assessment of the Computing Component of Civil Engineering Education,” the Journal
of Computing in Civil Engineering, American Society of Civil Engineers,
Volume 18, Number 3, July 2004.
21.
Abudayyeh, O., Dibert-DeYoung, A., and Jaselski, E., “Analysis of Trends in Construction
Research,” the Journal of Construction Engineering and Management,
American Society of Civil Engineers, Volume 130, Number 3, June, 2004.
22.
Abudayyeh, O., Abdel-Qader,
I, Nabulsi, S., and Weber, J., “Using
Non-Destructive Technologies and Methods in Bridge Management Systems,’’ the Journal
of Urban Technology, Carfax Publishing, Taylor and Francis
Group, Volume 11, Number 1, April, 2004.
23. Abdel-Qader, I., Abudayyeh, O., Kelly, M., “Analysis of Edge
Detection Techniques for Crack Identification in Bridges,” Journal of Computing
in Civil Engineering, American Society of Civil Engineers, Volume 17,
Number 3, October, 2003.
24. Randolph, D., Abudayyeh, O., and Menendez, M., “The Role
of the Engineer in Rural Municipalities,” Journal of Management in
Engineering, American Society of Civil Engineers, Volume 19, Number 3,
July, 2003.
25. Abudayyeh,
O. and Al-Battaineh, H., “An As-Built Information
Model for Bridge Maintenance,” Journal of Computing in Civil Engineering,
American Society of Civil Engineers, Volume 17, Number 2, April, 2003.
26. Abudayyeh,
O., Fredericks, T., Palmquist, M., and Torres, H.,
“Analysis of Occupational Injuries and Fatalities in the Electrical
Contracting Industry,” Journal of Construction Engineering and Management,
American Society of Civil Engineers, Volume 129, Number 2, March/April, 2003.
27. Abudayyeh, O., “An Undergraduate Research Mentoring Model
in Construction Engineering and Management,” Journal of Construction
Engineering and Management, American Society of Civil Engineers, Volume
129, Number 1, January/February, 2003.
28. Fredericks,
T., Abudayyeh, O., Palmquist, M., and Torres, H.,
“Mechanical Contracting Safety Issues,’’ Journal of Construction
Engineering and Management, American Society of Civil Engineers, Volume
128, Number 2, March/April, 2002.
29. Abudayyeh, O.Y., Temel, B., Al-Tabtabai, H., and
Hurley, B., "An Intranet-Based Cost Control System," Journal of
Advances in Engineering Software, January, 2001.
30. Abudayyeh, O., Russell, J., Johnston, D., and Rowings, J., "Construction Engineering and
Management Undergraduate Education," Journal of Construction
Engineering and Management, American Society of Civil Engineers, June,
2000.
31. Rasdorf, W., Shuller,
E., Poole, R., Abudayyeh, O., and Robson, F., "Information Management at
State Highway Departments: Issues and Needs," Journal of
Transportation Engineering, American Society of Civil Engineers, Volume
126, Number 2, March/April, 2000.
32. Abudayyeh, O.Y. and Andersen, K.,
"Integrated Construction Project Management: A Teaching Case
Study," Journal of Professional Issues in Engineering Education and
Practice, American Society of Civil Engineers, October, 1999.
33. Sawhney, A., Abudayyeh, O., and Chaitavatputtiporn, T., "Modeling and Analysis of a
Concrete Production Plant Using Petri Nets," Journal of Computing in
Civil Engineering, American Society of Civil Engineers, July, 1999.
34. Sawhney, A., Abudayyeh, O., and Monga, A., "Modeling and Analysis of a Mail
Processing Plant Using Petri Nets," Journal of Advances in
Engineering Software, Voulme 30, Number 8,
1999.
35. Abudayyeh, O., Sawhney,
A., El-Bibany, H., and Buchanan, D., "Concrete Bridge Demolition Methods and
Equipment," Journal of Bridge Engineering, American Society of
Civil Engineers, August, 1998.
36. Abudayyeh, O.Y., "The Journal
of Computing in Civil Engineering World-Wide-Web Homepage," Journal
of Computing in Civil Engineering, American Society of Civil Engineers,
Volume~11, Number~3, July, 1997.
37. Abudayyeh, O.Y., "A
Multi-Media Construction Delay Management System," Journal of
Microcomputers in Civil Engineering, Volume 12, Number 3, May, 1997.
38. Abudayyeh, O.Y, "Audio/Visual
Information in Construction Project Control," Journal of Advances in
Engineering Software, Volume 28, Number 2, March, 1997.
39. Abudayyeh, O.Y., "Safety
Issues in Bridge Demolition Projects: A Case Study," PM Network, Project
Management Institute, Volume XI, Number 1, January, 1997.
40. Abudayyeh, O.Y., "Multi-Media
Data Modeling and Database Design for Project Control," Project
Management Journal, Project Management Institute, Volume XXVII, Number 2,
Pages 5-13, June, 1996.
41. Abudayyeh, O.Y., "Partnering:
A Team Building Approach to Quality
Construction Management," Journal of Management in Engineering, American
Society of Civil Engineers, Volume 10, Number 6, November, 1994.
42. Abudayyeh, O.Y. and Maletic, V., "Using CAD in Construction Field
Engineering," Journal of Advances in Engineering Software, Volume
20, Number 1, 1994.
43. Abudayyeh, O.Y. and Maletic, V., "An Automated Contour Map System,"
Structure Notes, A Quarterly Publication of the Division of
Structures, The California Department of Transportation, Number 30, July,
1993.
44. Abudayyeh, O.Y. and Rasdorf, W.J., "Prototype Integrated Cost and
Schedule Control System," Journal of Computing in Civil Engineering, American
Society of Civil Engineers, Volume 7, Number 2, April, 1993.
45. Abudayyeh, O.Y., "Electronic
Data Acquisition Forms in Construction Management," Journal of
Advances in Engineering Software, Volume 16, Number 3, 1993.
46. Rasdorf, W.J. and Abudayyeh, O.Y.,
"NIAM Conceptual Database Design in Construction Management," Journal
of Computing in Civil Engineering, American Society of Civil Engineers,
Volume 6, Number 1, January, 1992.
47. Rasdorf, W.J. and Abudayyeh, O.Y., "A
Formal Approach to Schema Design for Engineering Databases," Journal
of Advances in Engineering Software, Volume 14, Number 1, January, 1992.
48. Abudayyeh, O.Y. and Rasdorf, W.J., "The Design of Construction Industry
Information Management Systems," Journal of Construction Engineering
and Management, American Society of Civil Engineers, Volume 117, Number
4, December, 1991.
49. Rasdorf, W.J. and Abudayyeh, O.Y.,
"Cost and Schedule Control Integration: Issues and Needs," Journal
of Construction Engineering and Management, American Society of Civil
Engineers, Volume 117, Number 3, September, 1991.
50. Law, K. H., Rasdorf,
W.J., Karamouz, M., and Abudayyeh, O.Y.,
"Computing in Civil Engineering Curriculum: Needs and Issues," Journal
of Professional Issues in Engineering, American Society of Civil
Engineers, Volume 116, Number 2, April, 1990.
51. Rasdorf, W.J., Lakmazaheri,
S., and Abudayyeh, O.Y., "The Development of a Geometric
Modeling/Database Management Interface," Journal of Advances in
Engineering Software, Volume 12, Number 2, April, 1990.
Conference Proceedings:
1.
Attanayake, U., Mohammed, A., Hu,
Y., Abudayyeh, O., and Aktan, H., “Life-Cycle Analysis
Considerations for Accelerated Bridge Construction,” Proceedings of the 3th International
Symposium on Life-Cycle Civil Engineering (IALCCE 2012), Vienna, Austria,
October, 2012.
2. Attanayake, U., Mohammed, A., Hu, Y., Abudayyeh, O., and Aktan,
H., “Decision Making Framework for Transportation Infrastructure
Selection, Proceedings of the International Conference on Advances
in Highway Engineering and Transportation Systems, Moratuwa, Sri
Lanka, July, 2011.
3.
Abudayyeh, O., Attanayake, U., Abdel-Qader, I., Aktan, H., Almaita, E., and Barbera, J.,
“An Information System for a Sensor-Based Bridge Health Monitoring System,” Proceedings of The 5th International Conference on Information
Technology (ICIT'11), Amman, Jordan,
May, 2011.
4.
Ulku, E., Attanayake, U., Aktan, H., and Abudayyeh, O., “Guidelines for Spacing of Posttension Ducts
in Full-Depth Deck Panels,” Proceedings
of the 90th Annual
Transportation Research Board (TRB) Conference, Washington, DC, January, 2011.
5.
Attanayake, U., Ulku, E., Aktan, H., and Abudayyeh, O., “Improving Durability
Performance of Prefabricated Bridge Deck Joints: What Do We Need to Know?” Proceedings of the
2010 FHWA Bridge
Engineering Conference: Highways for Life and Accelerated Bridge
Construction, Orlando,
FL, April, 2010.
6.
Yehia, S., Abudayyeh,
O., Zalt, A., and
Barbera, J., “SCC for Concrete Pavement
Repair,” Proceedings of the Third North
American Conference on the Design and Use of Self-Consolidating Concrete,
Chicago, IL, November, 2008.
7.
Yehia, S., Abudayyeh,
O., and Zalt, A., “Evaluation of Time Dependent
Properties of a SCC Mix,” Proceedings
of the Third North American Conference on the Design and Use of
Self-Consolidating Concrete, Chicago, IL, November, 2008.
8.
Krause, V., Abdel-Qader, I., Abudayyeh, O.,
and Yehia, S., “An Image Segmentation Algorithm for
the Detection of Rebar in Bridge Decks from GPR Scan,” Proceedings of IEEE
Electro/Information Technology Conference, Chicago, IL, May, 2007.
9.
Abdel-Qader, I., Yohali,
S., Abudayyeh, O., and Yehia, S., “Nondestructive
Evaluation of Bridge Decks Using Infrared Image Analysis,” Proceedings of IEEE Electro/Information Technology Conference, Chicago, IL,
May, 2007.
10.
Abdel-Qader, I., Ahmed, K., and Abudayyeh,
O., “Linear PCA Algorithm for Inspection of Concrete Bridges,” Proceedings of the 2005 International
Conference on Computing in Civil Engineering, American Society of Civil
Engineers, Cancun, Mexico, July, 2005.
11. Yehia, S., Abudayyeh, O., Nabulsi, S., Abdel-Qader, I.,
and Siddagangappa, J., “GPR
Imaging Evaluation of the Napier Avenue Interchange on I-94 Culvert,” Proceedings of the 2005 International
Conference on Computing in Civil Engineering, American Society of Civil Engineers,
Cancun, Mexico, July, 2005.
12.
Abudayyeh, O., Khan, T., Yehia, S., Randolph, D., and Johnson, J., “A Maintenance Information System for Rural Municipalities,” Proceedings
of the Fifth IEEE Electro/Information Technology Conference, Milwaukee, WI,
August, 2004.
13.
Abdel-Qader, I., Ahmed, K., and Abudayyeh,
O., “Linear Structure Modeling and
PCA Algorithm for Bridge Crack Detection,” Proceedings of the Fifth IEEE Electro/Information Technology
Conference, Milwaukee,
WI, August, 2004.
14. Choi, S., Fredericks, T., Abudayyeh,
O., and Battle, J., “A Review of Safety
Culture in the Roofing Industry,” Proceedings of the XVIII International Annual
Occupational Ergonomics and Safety Conference, Las Vegas, NV,
November 2003.
15. Choi, S., Fredericks, T., Abudayyeh,
O., and Wiersma, M., “A Study of the Current Measures
of Productivity in the Construction Industry,” Proceedings of the XVIII International Annual
Occupational Ergonomics and Safety Conference, Las Vegas, NV,
November 2003.
16. Choi, S., Fredericks, T., Abudayyeh,
O., and Keslinke, K., “A Review of Costs of
Injuries in the Roofing Industry,” Proceedings of the XVIII International Annual
Occupational Ergonomics and Safety Conference, Las Vegas, NV,
November 2003.
17. Abudayyeh,
O., Cai, H., Fenves, S.,
Law, K., O’Neill, R., and Rasdorf, W., “Role of
Computing in Civil Engineering: Practitioners' Perspective: 2002,” Proceedings
of the Information Technology in Civil Engineering Symposium, American Society of Civil Engineering,
Nashville, TN, November, 2003.
18. Abudayyeh,
O., Cai, H., Fenves, S.,
Law, K., O’Neill, R., and Rasdorf, W., “Role of
Computing in Civil Engineering: Educators' Perspective: 2002,” Proceedings
of the Information Technology in Civil Engineering Symposium, American Society of Civil Engineering,
Nashville, TN, November, 2003.
19. Nelson, J., Abudayyeh, O., Tsang, E., and
Williams, M., “A Program for Civil Engineering
Education in the 21st Century at Western
Michigan University,”
American Society of Engineering Education
(ASEE) Annual Conference, Nashville, TN,
June, 2003.
20. Abdel-Qader, I., Ahmed, K., Abudayyeh, O., and Miller, D.,
“Feature Extraction Using PCA and Cluster Analysis,” Submitted to the Fourth
IEEE Electro/Information Technology Conference, Indianapolis, IN,
June, 2003.
21. Fredericks,
T., Choi, S., Abudayyeh, O., and Rodriguez, J., “A
Review of Safety and Ergonomic Issues in the Roofing Industry,” Proceedings
of the XVII
International Annual Occupational Ergonomics and Safety Conference, Munich, Germany,
May, 2003.
22. Fredericks,
T., Choi, S., Abudayyeh, O., and Butt, S., “Identification
of Hazardous Tasks in the Roofing Industry,” Proceedings of the XVII International Annual
Occupational Ergonomics and Safety Conference, Munich, Germany,
May, 2003.
23. Abudayyeh, O., Fredericks, T., Palmquist,
M., and Torres, H., “Safety Management in the Electrical
Contracting Industry,” the Organization and Management of Construction
10th International Symposium: Construction Innovation and
Global Competitiveness, Cincinnati,
OH, September, 2002.
24. Fredericks, T., Abudayyeh, O., Palmquist,
M., and Torres, H., “Safety Management in the Mechanical
Contracting Industry,” the Organization and Management of Construction
10th International Symposium: Construction Innovation and
Global Competitiveness, Cincinnati,
OH, September, 2002.
25. Abudayyeh,
O., “Undergraduate Research Experiences in Construction Engineering and
Management,” American Society of Engineering Education (ASEE) Annual
Conference, Montreal,
Quebec, June, 2002.
26. Abudayyeh,
O., Fredericks, T., Butt, S., and Rodriguez,
J., “Analysis of Safety Problems in the Specialty Construction Industry,”
Proceedings of the XVI International Annual Occupational Ergonomics and
Safety Conference, International Society for Occupational Ergonomics and
Safety, Toronto, Ontario, June, 2002.
27. Abudayyeh,
O., Fredericks, T., Butt, S., Palmquist, M.,
Torres, “Safety in the Specialty Construction Industry: Challenges and
Opportunities,” Proceedings of the 6th Annual
International Conference on Industrial Engineering Theory, Applications and
Practice, San Francisco, CA, November, 2001.
28. Abudayyeh,
O., Al-Bataineh, M., Randolph, D., and Torres, A.,
“Information Management for Contract Administration in Local Government,” Proceedings
of the Second IEEE Electro/Information Technology Conference, Rochester, MI,
June, 2001.
29. Abudayyeh,
O., Al-Battaineh, H., and Hurley, B., “An As-Built
Information System for Bridge Management,” Proceedings of the Second IEEE
Electro/Information Technology Conference, Rochester, MI,
June, 2001.
30. Abudayyeh, O., Russell, J., Johnston,
D., and Rowings, J., "Undergraduate
Engineering Education for the Construction Industry, Proceedings of the
Sixth Construction Congress, American Society of Civil Engineers,
Orlando, FL, February, 2000.
31. Abudayyeh, O.Y.,
"Intranet-Based Project Control Systems for the Construction
Industry," Proceedings of the Fifth Congress on Computing in Civil
Engineering, American Society of Civil Engineers, Boston, MA,
October, 1998.
32. Abudayyeh, O.Y., "A
Multimedia Information System for Construction Delay Management," Proceedings
of the Third Congress on Computing in Civil Engineering, American Society
of Civil Engineers, Anaheim, CA, June, 1996.
33. Abudayyeh, O.Y., "Image
Databases in Construction Management," Proceedings of the Second
Congress on Computing in Civil Engineering -- Database Symposium, American
Society of Civil Engineers, Atlanta, GA, June, 1995.
34. Rasdorf, W.J., Abudayyeh, O.Y., and
Wyatt, T., "A Formal Approach to Modeling Construction Data," Proceedings
of the Seventh Conference on Computing in Civil Engineering, American
Society of Civil Engineers, Washington, DC, May, 1991.
35. Abudayyeh, O.Y. and Rasdorf, W.J., "Integrated Cost and Schedule Control
Automation," Proceedings of the Construction Congress'91: Preparing
for Construction in the 21st Century, American Society of Civil
Engineers, Cambridge, MA, April, 1991.
36. Rasdorf, W.J., Lakmazaheri,
S., and Abudayyeh, O.Y., "A Supervisory
System For CAD/CAM of Custom Orthopedic Footwear and Its Prototype
Implementation," Proceedings of the Symposium on Engineering Database
Management: The Technology for Integration, American Society of
Mechanical Engineers, Boston,
MA, August, 1990.
37. Law, K. H., Rasdorf,
W.J., Karamouz, M., and Abudayyeh, O.Y. "The Role
of Computing in Civil Engineering Education," Proceedings of the
Sixth Conference on Computing in Civil Engineering, American Society of
Civil Engineers, Atlanta, GA, September, 1989.
38. Law, K. H., Rasdorf,
W.J., Karamouz, M., and Abudayyeh, O.Y. "The
Role of Computing in Civil Engineering Education," Proceedings of the
1990 National Forum on Education and Continuing Development for the Civil
Engineer: Setting the Agenda, American Society of Civil Engineers, Las
Vegas, NV, April, 1990.
39. Rasdorf, W.J., Abudayyeh, O.Y., and Lakmazaheri, S., "The Structure of the NASCAD-RIM
Interface," Proceedings of the Symposium on Engineering Database
Management: Leadership--Key to the 90s, American Society of Mechanical
Engineers, Anaheim, CA, August, 1989.
Research Reports:
1.
Servi, A., Abudayyeh, O., Attanayake,
U., Aktan, H., “A Constructability Model for Accelerated Bridge Construction Projects,”
Technical Report Number CCE-2011-01, Department of Civil and Construction
Engineering, Western
Michigan University,
July, 2011.
2.
Abu-Amara, F., Abdel-Qader,
I., and Abudayyeh, O., “Automated Framework for Defect Detection in Concrete
Bridge Decks Using Fractals and Independent Component Analysis,” Technical
Report Number ITIA-2010-03, Information Technology and Image Analysis (ITIA)
Center, College of Engineering and Applied Sciences, Western Michigan
University, Kalamazoo, MI, July, 2010.
3.
Abudayyeh, O., “A Sensor Network System for the Health Monitoring of
the Parkview Bridge Deck, “Final Report Number RC 1536, the Michigan
Department of Transportation, January, 2010.
4.
Abdel-Qader, I., Abu-Amara,
F., Krause, V., and Abudayyeh, O., “Comparative Study of Deconvolution
Algorithms for GPR Bridge Deck Imaging,” Technical Report Number
ITIA-2010-01, Information Technology and Image Analysis (ITIA) Center,
College of Engineering and Applied Sciences, Western Michigan University,
Kalamazoo, MI, January 2010.
5.
Barbera, J., Abudayyeh, O., Abdel-Qader,
I., and Almaita, E.. “The Design and Implementation of Sensor Networks
System for the Health Monitoring of Concrete Bridges,” Technical Report,
Department of Civil and Construction Engineering, Western Michigan
University, CCE-09-01,
April 2009.
6.
Abudayyeh, O., Yehia, S., and Abdel-Qader, I., “Sensor Networks for the Evaluation and Health
Monitoring of the Rapid
Bridge Replacement
Technique,” Final Report, Calhoun
County Road Commission, December 2008.
7.
Zalt, A., Bollenbach, A., Yehia, S., and Abudayyeh, O., “Rapid Bridge Construction
Techniques – State of the art,” Technical Report, Western Michigan
University, CCE-07-04,
July 2007.
8.
Yehia, S., Abudayyeh, O., and Abdel-Qader,
I., “GPR Scan of the J-Drive Bridges in Calhoun County,
Michigan,” Final Report, the Michigan Department of
Transportation-Southwest Region Office, February, 2006.
9.
Yohali, S., Abdel-Qader, I.,
Abudayyeh, O., and Yehia, S., “Segmentation of
Thermal Images for Nondestructive Testing Applications,” Technical Report
2005-101, Tthe Information
Technology and Image Analysis (ITIA) Center, Western Michigan
University, May
2005.
10.
Nabulsi, S., Abudayyeh, O., Yehia,
S., and Abdel-Qader,
I., “The Detection of Common Concrete Bridge Deck Defects Using Thermography, Impact Echo, and Ground Penetrating Radar,”
Technical Report Number CEM-05-01, Department of Civil and Construction
Engineering, WMU, Kalamazoo, MI, January 2005.
11.
Yehia, S., Abudayyeh, O., and Abdel-Qader,
I., “Interstate 94 GPR Scan in Benton Harbor, MI: Culvert, Soil and Pavement Evaluation At Exit 30,”
Final Report, the Michigan
Department of Transportation-Southwest Region Office, 2005.
12. Ahmed, K., Abdel-Qader, I., Abudayyeh, O., “Feature Detection using Linear
Structure Modeling and PCA,” Technical Report 2004-101, The Information Technology and Image Analysis (ITIA) Center,
Western Michigan University, November 2004.
13.
Khattack, S., Abudayyeh, O., Randolph, D., and Johnson, J.,
“Calhoun County Operation Maintenance Manual,” Report Number CEM-04-04, Department
of Civil and Construction Engineering, WMU, Kalamazoo, MI, April 2004.
14.
Khan, T., Abudayyeh, O., Randolph, D., and Johnson, J., “Design of
Maintenance Management Model for Rural Road Public Works,” Report Number
CEM-04-03, Department of Civil and Construction Engineering, WMU, Kalamazoo,
MI, April 2004.
15.
Zidan, S. and Abudayyeh, O., “Innovative Contracting
Pre-Qualification/Selection Model Using Analytical Hierarchy Process (AHP),”
Report Number CEM-04-02, Department of Civil and Construction Engineering,
WMU, Kalamazoo, MI, January 2004.
16.
Kulkarni, R., Damrithamnij, S.,
Abudayyeh, O., Randolph, D., and Johnson, J., “Quality Verification in
Contract Administration,” Report Number CEM-04-01, Department of Civil and
Construction Engineering, WMU, Kalamazoo,
MI, January 2004.
17.
Battle, J., Fredericks, T., Abudayyeh,
O., and Choi, S., “A Review of the Role of Safety
in the Roofing Industry,” Report No. CEM-03-04,
Civil and Construction Engineering Department, WMU, Kalamazoo, MI,
Aug. 2003
18.
Wiersma, M., Fredericks,
T., Abudayyeh, O., and Choi, S., “A Study of
Relationship Between Productivity Measure and Safety in the Roofing Industry”
Report No. CEM-03-10, Civil and Construction
Engineering Department, WMU, Kalamazoo,
MI, Aug. 2003
19.
Keslinke, K., Fredericks, T., Abudayyeh, O., and Choi, S., “a Study of Detailed injuries and their
Relationship to Costs in the Roofing Industry,” Report No. CEM-03-07,
Civil and Construction Engineering Department, WMU, Kalamazoo, MI,
Aug. 2003
20.
Dibert-DeYoung, A. and Abudayyeh, O., “Foundations for Research
in Computing in Civil Engineering” Report No. CEM-03-02,
Civil and Construction Engineering Department, WMU, Kalamazoo, MI,
Aug. 2003.
21. McAndrew, K. and Abudayyeh, O.,
“Construction Administration for Engineering Consulting Firms, Technical
Report Number CEM-03-01, Department of Civil and Construction Engineering, Western Michigan
University, Kalamazoo, MI,
April, 2003.
22. Shaar, A., Abudayyeh, O., Fredericks,
T., and Butt, S., “Management Commitment to Construction Safety,” Technical
Report Number CEM-02-14, Department of
Construction Engineering, Materials Engineering, and Industrial
Design, Western Michigan University, Kalamazoo, MI, December, 2002.
23. Al-Bataineh, M., Abudayyeh, O., and Abdel-Qader, I., “An Imaging System for Concrete Bridge
Inspection,’’ Technical Report Number CEM-02-13, Department of Construction Engineering, Materials
Engineering, and Industrial Design, Western Michigan University, Kalamazoo,
MI, December, 2002.
24. Dibert-Deyoung, A. and Abudayyeh, O., “Analysis of Trends in Construction
Research,” Report No. CEM-02-04, WMU, Kalamazoo, MI,
July, 2002.
25. Wiersma, M.,
Charles, M., Choi, S., Fredericks, T., and
Abudayyeh, O., “A Review of Safety and Ergonomics Issues in the Roofing
Industry” Report No. CEM-02-05, WMU, Kalamazoo, MI,
July, 2002.
26.
Butt, S., Abudayyeh, O., and Byce, J., “Comparison of Project Delivery Systems Using
Rank-Based Analysis and Data Envelopment Analysis” Report No. CEM-02-06, WMU, Kalamazoo,
MI, July, 2002.
27. Jallah, S., Butt,
S. and Abudayyeh, O., “Pre-Qualification and Final Selection of
Contractors,” Report No. CEM-02-07, WMU, Kalamazoo,
MI, July, 2002.
28. Abdel-Qader, I.,
Kelly, M., and Abudayyeh, O., “Imaging Techniques for Crack Detection in
Bridges,” Report No. CEM-02-08, WMU, Kalamazoo, MI,
July, 2002.
29. Godanti, A. and Abudayyeh, O., “A
Contract Administration Information System for Small Municipalities,’’
Technical Report Number CEM-02-03, Department of Construction Engineering, Materials
Engineering, and Industrial Design, Western Michigan University, Kalamazoo,
MI, May, 2002.
30. De
Silva, A. and Abudayyeh, O., “A Model for Optimizing the Selection of Project
Delivery Systems Using Analytic Hierarchy Process (AHP),’’ Technical Report
Number CEM-02-02, Department of Construction Engineering, Materials
Engineering, and Industrial Design, Western Michigan University, Kalamazoo,
MI, May, 2002.
31. Al-Battaineh, H. and Abudayyeh, O., “As-Built Data in Bridge
Management Systems,’’ Technical Report Number CEM-02-01, Department of Construction Engineering, Materials
Engineering, and Industrial Design, Western Michigan University, Kalamazoo,
MI, April, 2002.
32. Menendez,
M., Al Bataineh, M., Abudayyeh, O., Randolph, D.,
and Torres, A., “The Development of Calhoun County Building Construction
Manual,” Technical Report Number CEM-01-02, Department of Construction
Engineering, Materials Engineering, and Industrial Design, Western Michigan
University, Kalamazoo, MI, July, 2001.
33. Menendez,
M., Abudayyeh, O., and Randolph, D., “The Role of the Engineer in Rural
Municipalities,” Technical Report Number CEM-01-03, Department of
Construction Engineering, Materials Engineering, and Industrial Design,
Western Michigan University, Kalamazoo, MI, July, 2001.
34. Fredericks, T., Abudayyeh, O., Wolfgram,
J., and Campbell, V., “The Relationship of Managerial Commitment and Employee
Safety Among Construction Firms,” Technical Report Number CEM-01-04,
Department of Construction Engineering, Materials Engineering, and Industrial
Design, Western Michigan University, Kalamazoo, MI, July, 2001.
35. Gac, A. and Abudayyeh, O., “An Overview of Bridge
Management Systems: State of the Art,” Technical Report Number CEM-01-05,
Department of Construction Engineering, Materials Engineering, and Industrial
Design, Western Michigan University, Kalamazoo, MI, July, 2001.
36. Byce, J., Abudayyeh, O., and
Randolph, D., “A Model for Communicating Engineering Information in Local
Municipalities,” Technical Report Number CEM-01-06, Department of
Construction Engineering, Materials Engineering, and Industrial Design,
Western Michigan University, Kalamazoo, MI, July, 2001.
37. Teufel, S., Abdel-Qader,
I., and Abudayyeh, O., “Intelligent Transportation Systems: State of the
Art,” Technical Report Number CEM-01-07, Department of Construction Engineering,
Materials Engineering, and Industrial Design, Western Michigan University,
Kalamazoo, MI, July, 2001.
38. Abudayyeh,
O. and Anderson, S., “A Planning Strategy for the Demolition of Abandoned and
Tax Reverted Properties in the City of
Benton Harbor,” Technical Report Number CEM-01-01, Department of Construction Engineering, Materials
Engineering, and Industrial Design, Western Michigan University, Kalamazoo,
MI, June, 2001.
39.
Fredricks, T.,
Abudayyeh, O., Palmquist, M., and Torres, H.,
"Mechanical and Electrical Contracting Injuries, Illnesses, and
Fatalities,'' Technical Report Number CEM-00-3, Department of Construction
Engineering, Materials Engineering, and Industrial Design, Western Michigan
University, Kalamazoo, MI, August, 2000.
40.
Abudayyeh, O., Al-Battaineh,
H., and Hurley, B., "As-Built Data Management for Bridge Construction,''
Technical Report Number CEM-00-04, Department of Construction Engineering,
Materials Engineering, and Industrial Design, Western Michigan University,
Kalamazoo, MI, August, 2000.
41.
Abudayyeh, O., Weber, J., and Abdel-Qader, I, "A Survey of Non-Destructive Testing
Techniques for Bridge Condition Evalauation,''
Technical Report Number CEM-00-05, Department of Construction Engineering,
Materials Engineering, and Industrial Design, Western Michigan University,
Kalamazoo, MI, August, 2000.
42.
Lee, C., Todman, L., and
Abudayyeh, O., "Designing Safer Communities Using Physical Crime
Prevention Theories," Technical Report Number CEM-00-6, Department of
Construction Engineering, Materials Engineering, and Industrial Design, Western Michigan
University, Kalamazoo, MI,
August, 2000.
43.
Suvedi, K.,
Abudayyeh, O., and Todman, L., "Impact of
Physical Design Elements on Community Safety," Technical Report Number
CEM-99-02, Department of Construction Engineering, Materials Engineering, and
Industrial Design, Western Michigan University, Kalamazoo, MI, December,
1999.
44. Temel, B., Abudayyeh, O.A., Hurley, B.,
and Al-Tabtabai,H., "An Intranet-Based Cost
Control System," Technical Report Number CEM-99-1, Department
of Construction Engineering, Materials Engineering, and Industrial
Design, Western Michigan University, Kalamazoo, MI, August 1999.
45. Abudayyeh, O.A. and Buchanan, D.,
"Bridge Demolition Techniques, "
Technical Report Number CEM-97-01, Department of Construction Engineering,
Materials Engineering, and Industrial Design, Western
Michigan University,
Kalamazoo, MI, January 1997.
46. Varma, A., Hannesson,
J., and Abudayyeh, O., "GIS and Pavement Management Systems,"
Technical Report, Department of Space Studies for the NASA Space Grant
Fellowship Program, University of North Dakota, Grand Forks, ND, December
1996.
47. Varma, A., Meyer, B., and Abudayyeh,
O., "Integrating CAD and GIS for Bridge Inspection, Maintenance and
Rehabilitation, and Permitting," Technical Report, Department of Space
Studies for the NASA Space Grant
Fellowship Program, University of North Dakota, Grand Forks, ND, December
1996.
48. Hanneson, J., Abudayyeh, O., and Varma, A., "Non-Destructive Evaluation for Concrete
Bridges," Technical Report Number CME-96-01, Submitted to the Department
of Space Studies for the NASA Space Grant Fellowship Program, University of
North Dakota, Grand Forks, ND, May, 1996.
49. Janisch, A., Abudayyeh, O., and Varma, A., "Applications of GIS in Transportation,"
Technical Report Number CME-96-02, Submitted to the Department of Space
Studies for the NASA Space Grant Fellowship Program, University of North
Dakota, Grand Forks, ND, May, 1996.
50. Meyer, B., Abudayyeh, O., and Varma, A., "Attributes of Bridge Management
Systems," Technical Report Number CME-96-03, Submitted to the Department
of Space Studies for the NASA Space Grant Fellowship Program, University of
North Dakota, Grand Forks, ND, May, 1996.
51. Abudayyeh, O.Y., "The
Modeling, Design and Implementation of A Construction Multi-Media Information
Management System," Technical Report CME-95-01, Construction Division,
Department of Civil Engineering and Construction, North Dakota State
University, Fargo, ND, August, 1995.
52.
Abudayyeh, O.Y., "An Automated Data Acquisition
and Data Storage Model for Improving Construction Cost and Schedule
Control," Doctor of Philosophy Dissertation, Civil Engineering
Department, North Carolina
State University,
August 1991.
53. Abudayyeh, O.Y. and Rasdorf, W.J., "I(CS)2: A
Prototype Integrated Cost and Schedule Control System, User's Manual,"
Civil Engineering Department, North Carolina
State University,
Raleigh, NC, August, 1991.
54. Abudayyeh, O.Y. and Rasdorf, W.J., "An Assessment of Cost and Schedule
Control Integration Models," Technical Report CE-90-10, Civil
Engineering Department, North Carolina State University, Raleigh, NC, August,
1990.
55. Abudayyeh, O.Y. and Rasdorf, W.J., "An Overview of Automated Data
Acquisition Technologies," Technical Report CE-90-09, Civil Engineering
Department, North Carolina State University, Raleigh, NC, May, 1990.
56. Rasdorf, W.J., Lakmazaheri,
S., and Abudayyeh, O.Y., "Engineering Specification and System Design
for CAD/CAM of Custom Shoes Project - Supervisory System Development," A
Report to National Aeronautics and Space Administration (NASA), Technical
Report CE-021-89, Civil Engineering Department, North Carolina State
University, Raleigh, NC, July 1989.
57. Rasdorf, W.J., Lakmazaheri,
S., and Abudayyeh, O.Y., "Engineering Specification and System Design
for CAD/CAM of Custom Shoes Project - Data Representation and System
Integration," A Report to National Aeronautics and Space Administration
(NASA), Technical Report CE-011-89, Civil Engineering Department, North
Carolina State University, Raleigh, NC, January 1989.
58. Rasdorf, W.J., Lakmazaheri,
S., and Abudayyeh, O.Y., "NASCAD--RIM Interface User's Guide,"
Civil Engineering Department, North Carolina
State University,
Raleigh, NC, July 1988.
59. Abudayyeh, O.Y., "Robotics
Applications in Civil Engineering Practice," Masters Thesis, Civil
Engineering Department, Construction Engineering and Management Division,
University of California at Berkeley, CA, December, 1987.
60. Abudayyeh, O.Y. and Al-Atrash S., "Fiber Reinforced Concrete,"
Bachelor Thesis, Civil Engineering Department, Kuwait University, Kuwait,
May, 1984.
|
|
