PUBLICATIONS

 

 

A Deviatoric Version of the SWT Parameter, D. Kujawski, International Journal of Fatigue , 2014 (in press).

 

A Deviatoric Stress-Strain Function for Fatigue Life Analysis, P.C.R. Sree and D. Kujawski, Advanced Materials Research, Vol. 891-892, 2014, pp. 789-802.

Environment and Stress Interaction in Corrosion Fatigue and Stress Corrosion Cracking, D. Kujawski, Metallurgical and Materials Transactions A, Vol. 44A, No. 3, 2013, pp. 1340- 1352.

 

Effect of Crack-Tip Stresses on SCC Behavior,  D. Kujawski and K. Sadananda, Metallurgical and Materials Transactions A, Vol. 42A, No. 2, 2011, pp. 377- 382.

 

Role of Viscosity on Capillary Flow and Stress Corrosion Cracking Behavior, D. Kujawski, S. Yerramilli and A.K. Vasudevan, Metallurgical and Materials Transactions A, Vol. 42A, No. 2, 2011, pp. 373- 376.

 

Analysis of Stress Distribution in Compression Precracking, J. G. Yu and D. Kujawski, International Journal of Structural Integrity, Vol.1, No. 2, 2010, pp 140-152.

 

Effects of Spectrum Modification on Fatigue Crack Growth, D. Kujawski and S. Stoychev, Fatigue and Fracture of Engineering Materials and Structures, Vol. 33, 2010, pp. 161-173.

 

Numerical Simulation of Fatigue Crack Growth by Crack–Tip Blunting, J.M. Hunnell and D. Kujawski, Engineering Fracture Mechanics, Vol. 76, 2009, pp. 2056-2064.

 

A Two-Parameter Analysis of S-N Fatigue Life using Ds and smax, K. Sadananda, S. Sarkar, D. Kujawski, A.K. Vasudevan, Int. J. Fatigue, Vol. 31, 2009, pp.1648-1659.

 

Generation and Analysis of FCG Data Using a Single Specimen and Kmax-DK testing Matrix, D. Kujawski, and Phani C. R. Sree, International Journal of  Fatigue, Vol. 31, 2009, pp. 1638-1647.

 

Estimations of Stress Intensity Factor for a Short Crack in an Elastic-plastic Notch, D. Kujawski,  Engineering Fracture Mechanics, Vol. 75, 2008, pp. 5246-5247.

 

A General Equation for Kop and KPR Description, H-C. Lin, D. Kujawski, Engineering Fracture Mechanics, Vol. 75, 2008, pp. 3244-3248.

 

Crack-tip Stresses and Their Effect on Stress Intensity Factor for Crack Propagation, S. Stoychev, D. Kujawski, Engineering Fracture Mechanics, Vol. 75, 2008, pp. 2469-2479.

 

Mechanical Characterization of Micro/Nano Structures, D. Kujawski and M. K. Ghantasala, The Open Nanoscience Journal, Vol. 1, 2007, pp.60-65.

 

Internal Stress Effects on Fatigue Crack Initiation at Notches, D. Kujawski, S. Stoychev, International Journal of Fatigue, Vol. 29, 2007, pp. 1744-1750.

 

On Assumptions Associated with DKeff and Their Implications on FCG Predictions, Kujawski, D., International Journal of Fatigue, Vol. 27, 2005, pp. 1267-1276.

 

Analysis of Crack Propagation using DK and Kmax, Stoychev, S. and Kujawski, D., International Journal of Fatigue, International Journal of Fatigue, Vol. 27, 2005, pp. 1425-1431.

 

Fatigue Damage Diagram for Materials with Defects, Kim, B-J. and Kujawski, D., Fatigue and Fracture Mechanics: 34th Volume, ASTM STP 1461, S.R. Daniewicz, J.C. Newman and K-H. Schwalbe, Eds., ASTM International, West Conshohocken, PA, 2004.

 

A New Method for Opening Load Determination from Compliance Measurements, Kujawski, D. and Stoychev, S., Fatigue and Fracture Mechanics: 34th Volume, ASTM STP 1461, S.R. Daniewicz, J.C. Newman and K-H. Schwalbe, Eds., ASTM International, West Conshohocken, PA, 2004, pp. 525-538.

 

Correlation and Prediction of Fatigue Crack Growth for Different R-ratios using Kmax and DK+ Parameters, Dinda. S. and Kujawski, D., Engineering Fracture Mechanics, Vol. 71, Issue 12, 2004, pp. 1779-1790.

 

Methods for Crack Opening Load and Crack Tip Shielding Determination: A Review, Stoychev, S. and Kujawski, D., Fatigue and Fracture of Engineering Materials and Structures, Vol. 26, 2003, pp. 1053-1067.

 

Parametric Study on the Variability of Opening Load Determination, Kujawski, D. and Stoychev, S., International Journal of Fatigue, Vol. 25, 2003, pp. 1181-1187.

 

DKeff Parameter Under Re-examination, Kujawski, D., International Journal of Fatigue, Vol. 25, 2003, pp. 793-800.

 

Utilization of Partial Crack Closure for Fatigue Crack Growth Modeling, Kujawski, D., Engineering Fracture Mechanics, Vol. 69, 2002, pp. 1315-1324.

 

Non-Destructive Damage Evaluation in Composites using Vibroacustic Techniques – A Review, Kujawski. D., Radkowski. S., Diagnostyka, Vol. 24, 2001, pp.60-67.

 

A Fatigue Crack Driving Force Parameter with Load Ratio Effects, Kujawski, D., International Journal of Fatigue, Vol. 23, 2001, pp. S239-S246.

 

A New (KmaxDK+)0.5 Driving Force Parameter for Crack Growth in Aluminum Alloys, Kujawski, D., International Journal of Fatigue, Vol. 23, 2001, pp. 733-740.

 

Correlation of Long- and Physically Short-Crack Growth in Aluminum Alloys, Kujawski, D., Engineering Fracture Mechanics, Vol. 68, 2001, pp. 1357-1369.

 

Sequence Effects of Small Amplitude Cycles on Fatigue Crack Initiation and Propagation in 2024-T351 Aluminum”,  Ngiau, C. Kujawski, D., International Journal of Fatigue, Vol. 23, 2001, pp. 807-815.

 

Enhanced Model of Partial Crack Closure for Correlation of R-ratio Effects in Aluminum Alloys, Kujawski, D., International Journal of Fatigue, Vol. 23, 2001, pp. 95-102.

 

Width Effects on the Tensile Strength and Fatigue Behavior of Angle-Ply Laminates, Kujawski, D., International Journal of Fatigue, Vol.20, No.8, 1998, pp. 575-580.

 

The Fatigue Behavior of Filament-Wound Fiberglass/Epoxy Tubes Under Cyclic Pressure, Kujawski, D., Ellyin, F. and Culen, M.S., Journal of Reinforced Plastics and Composites, Vol.17, No.3, 1998, pp. 268-281.

 

Transverse Cracking of Symmetric and Unsymmetric Glass Fibre/Epoxy Resin Laminates, Hoover, J.W., Kujawski, D. and Ellyin, F., Composite Science and Technology. Vol.57, 1997, pp. 1513-1526.

 

The Behaviour of Multidirectional Filament Wound Fibreglass/Epoxy Tubulars Under Biaxial Loading, Carroll, M., Ellyin, F., Kujawski, D. and Chiu, A.S, Composites A, Vol.28, No. 9/10, 1997 pp. 769-780.

 

On the Elastic Longitudinal Stress Estimation in the Neighbourhood of Notches, Kujawski, D. and Shin, S.C., Engineering Fracture Mechanics, Vol. 56, No. 1, 1997, pp. 137-138.

 

Effect of Mean Stress and Ratcheting Strain on Fatigue Life of Steel, Xia, Z., Kujawski, D. and Ellyin, F., Int. Journal of Fatigue, Vol. 18, No. 5, 1996, pp. 335-341.

 

An Effective Stress Parameter for Long-Term Fatigue Strength of Fibre Reinforced Plastic Pipes, Kujawski, D., Chiu, A.S. and Ellyin, F., Journal of Composites Technology & Research,  JCTRER, Vol.18, No.3, July 1996, pp. 215-220.

 

Tensile and Fatigue Behaviour of Fibreglass/Epoxy Laminates, Ellyin, F. and Kujawski, D., Construction and Building Materials, Vol. 9, No. 6, 1995, pp. 425-430.

 

The Rate Dependent Behaviour of ±55  Filament Wound Fibreglass/Epoxy Tubes Under Biaxial Loading, Carroll, M., Ellyin, F., Kujawski, D. and Chiu, A.S., Composites Science and Technology, Vol. 55, 1995, pp. 391-403.

 

The Rate/Frequency-Dependent Behaviour of Fibreglass-Epoxy Laminates in Tensile and Cyclic Loading, Kujawski, D. and Ellyin, F., Composites Vol. 26, No. 10, 1995, pp.719-723.

The Behaviour of Small Corner Cracks in a Ferritic/Perlitic Steel:  Experiments and Analysis, Craig, D., Ellyin, F. and Kujawski, D., Fatigue Fract. Engng Mater. Struct., Vol. 18, No. 7/8, 1995, pp. 861-873.

 

An Experimental Technique to Study the Behaviour of Small Corner Cracks, Craig, D., Kujawski, D. and Ellyin, F., Int. Journal of Fatigue, Vol. 27, No. 4, 1995, pp. 253-259.

 

Stacking Sequence Effect on Tensile and Fatigue Strength of Symmetric Laminates, Carroll, M., Ellyin, F. and Kujawski, D., Polymers & Composite Polymers, Vol.3, No.1, 1995, pp. 1-10.

A Unified Approach to Mean Stress Effect on Fatigue Threshold Conditions, Kujawski, D. and Ellyin, F., Int. Journal of Fatigue, Vol.17, No.2, 1995, pp. 101-106.

 

Fatigue Growth of Physically Small Inclined Cracks, Kujawski, D. and Ellyin, F., Fatigue Fract. Engng Mater. Struct., Vol. 16, No. 7, 1993, pp. 743-752.

 

A Multiaxial Fatigue Criterion Including Mean-Stress Effect, Ellyin, F. and Kujawski, D., Advances in Multiaxial Fatigue, ASTM STP 1191, D.L. McDowell and R. Ellis (eds.), American Society for Testing and Materials, Philadelphia, 1993, pp. 55-66.

 

Propagation of Small Corner Cracks Initiated in Cyclic Compression, Kujawski, D. and Ellyin, F., Engineering Fracture Mechanics, Vol. 43, No. 4, 1992, pp. 657-662.

 

Initiation and Total Fatigue Life of a Low Alloy Carbon Steel in Vacuum and Air, Kujawski, D. and Ellyin, F., Journal of Testing and Evaluation, JTEVA, Vol. 20, No. 6, November 1992, pp. 391-395.

 

The Development of Crack Closure with Crack Extension, Lam, Y.C., Kujawski, D. and Ellyin, F., Scripta Metallurgica et Materiala, Vol. 25, 1991, pp. 2313-2318.

 

Estimation of Stress Intensity Factors for Small Cracks at Notches, Kujawski, D., Int. J. of Fatigue Fract. Engng Mater. Struct., Vol. 14, No. 10, 1991, pp. 953-965.

 

A Fatigue Failure Criterion Based on Strain Energy Density, Kujawski, D., Theoretical and Applied Mechanics, Vol. 7, 1, 1989, pp.15-22.

 

Generalization of Notch Analysis and Its Extension to Cyclic Loading, Ellyin, F. and Kujawski, D., Engineering Fracture Mechanics, Vol. 32, No. 5, 1989, pp. 819-826.

 

On the Concept of Cumulative Fatigue Damage, Kujawski, D. and Ellyin, F., Int. Journal of Fracture, Vol. 37, 1988, pp. 263-278.

 

Shape Factor Evaluation and Stress and Strain Distributions in a Plane Specimen with a Central Hole, Kujawski, D., Engineering Transactions, Vol. 36, No. 1, 1988, pp. 181-191.

 

The Effect of Load Ratio on Fatigue Life and Crack Growth (in Polish), Kujawski, D., Publications of Technical University of Kielce, Mechanika, No. 40, 1987, pp. 105-112.

 

A Fatigue Crack Growth Model with Load Ratio Effects, Kujawski, D. and Ellyin, F., Engineering Fracture Mechanics, Vol. 28, No. 4, 1987, pp. 367-378.

 

The Effect of Cyclic Loading on the Slope of the Stress-Strain Immediately Upon Load Reversal, Kujawski, D. and Ellyin, F., RES Mechanica, Vol. 22, No. 4, 1987, pp. 295-299.

 

Notch Root Stress/Strain Prediction for Elastic-Plastic Loading, Ellyin, F. and Kujawski, D., RES Mechanica, Vol. 20, 1987, pp. 177-190.

 

On the Size of the Plastic Zone Ahead of Crack Tip, Kujawski, D. and Ellyin, F., Engineering Fracture Mechanics, Vol. 25, No. 2, 1986, pp. 229-236.

A Fatigue Crack Propagation Model, Kujawski, D. and Ellyin, F., Engineering Fracture Mechanics, Vol. 20, No. 5/6, 1984, pp. 695-704.

 

Plastic Strain Energy in Fatigue Failure, Ellyin, F. and Kujawski, D., J. Pressure Vessel Technology, Trans. ASME, Vol. 106, Nov. 1984, pp. 342-347.

 

A Cumulative Damage Theory for Fatigue Crack Initiation and Propagation, Kujawski, D. and Ellyin, F., Int. Journal of Fatigue, Vol. 6, No. 2, April 1984, pp. 83-88.

 

Low-Cycle Fatigue Life in Terms of Energy Dissipation, Kujawski, D., Machine Dynamics Problems, Warsaw Technical University Publications, Vol. 1, 1984, pp. 127-138.

 

The Rate Time Dependent Behaviour of Ti 7A12Cb 1Ta Titanium Alloy at Room Temperature under Quasi Static Monotonic and Cyclic Loading, Kujawski, D. and Krempl, E.,  ASME Journal of Applied Mechanics, Vol. 48, 1981, pp. 55-63.

 

An Experimental Study of Uniaxial Creep, Cyclic Creep and Relaxation of AISI Type 304 Stainless Steel at Room Temperature, Kujawski, D., Krempl, E. and Kallianpur, V.,  J. Mech. Phys. Solids, Vol. 28, 1980, pp. 129-148.

 

A Viscoplastic Material Model and Its Application to Cyclic Loading, Kujawski, D. and Mroz, Z.,  Acta Mechanica, Vol. 36, 1980, pp. 213-230.

 

Low-Cycle Fatigue of Large Capacity Supplementary Car Frame (in Polish), Grzelecki, A., Kujawski, D. and Zaremba, Z.,  Przeglad Mechaniczny, No. 8, 1977, pp. 267-269.