PUBLICATIONS:

Book Chapter:

  1. G. Rius, B. Ziaie, A. Baldi, M.Z. Atashbar “Introduction to micro/nanofabrication” in Nanotechnology Handbook, B. Bhushan, ed., Springer-Verlag, Heidelberg, Germany, pp. 147-184, first edition, 2004; Second Edition, pp. 197-237, 2007; pp. 231-269, Third Edition, 2010, pp.51-86 Fourth Edition 2017.
  2. M.Z. Atashbar and S. Krishnamurthy “Surface Acoustic Wave sensors and their wireless application” Encyclopedia of Sensors, C. Grimes and E.C. Dickey, American Scientific Publishers, Encyclopedia of Sensors, C. Grimes and E.C. Dickey, American Scientific Publishers, pp. 75-94, 2006.
  3. M.Z. Atashbar, S. Krishnamurthy, G. Korotcenkov “Basic principles of chemical sensor operation” in Chemical Sensor, Fundamentals of Sensing materials, G. Korotcenkov, ed., Momentum Press, LLC, Volume 1, pp.1-62, 2010.
  4.  M.Z. Atashbar and S. Krishnamurthy “Sensing and sampling strategies” in Chemical Sensor, Fundamentals of Sensing materials, G. Korotcenkov, ed., Momentum Press, Volume 4, pp. 39-52, 2011.

 

Journal papers:

5.       M. Ochoa, R. Rahimia, J. Zhoua, H. Jianga, C. K. Yoon, D. Maddipatla, B. B. Narakathu, V. Jain, M. Oscai, T. Morken, R. H. Oliveira, G. L. Campana, M. A. Zieger, R. Sood, M. Z. Atashbar, B. Ziaie “Integrated sensing and delivery of oxygen for next-generation smart wound dressings” (in preparation).

6.       V.S. Turkani, D. Maddipatla, B.B. Narakathu, B.N. Altay, P.D. Fleming, B.J. Bazuin, and M.Z. Atashbar “Printed Nickel based Resistance Temperature Detector on Flexible Polyimide Substrate” (Submitted).

7.       S. Ali, D. Maddipatla, B.B. Narakathu, A.A. Chlaihawi, S. Emamian, F. Jabani, B.J. Bazuin, and M.Z. Atashbar “Flexible Capacitive Pressure Sensor Based on PDMS Substrate and Ga-In Liquid Metal” (Submitted).

8.       A.A. Chlaihawi, B.B. Narakathu, S. Emamian, B.J. Bazuin, and M.Z. Atashbar, “Development of printed and flexible dry ECG electrodes” Sensing and Bio-Sensing Research, 20, 9-15, 2018, https://doi.org/10.1016/j.sbsr.2018.05.001

9.       V. S . Turkani,D. Maddipatla, B.B. Narakathu, B.J. Bazuin, and M.Z. Atashbar, M. Z. “A Carbon Nanotube Based NTC Thermistor using Additive Print Manufacturing Processes” Sensors and Actuators A: Physical. 279, 15, 1-9, 2018, https://doi.org/10.1016/j.sna.2018.05.042

10.    M.M. Ali, D. Maddipatla, B.B Narakathu, A.A. Chlaihawi, S. Emamian, F. Janabi, B.J. Bazuin, M.Z. Atashbar “Printed Strain on silver nanowire/silver flake composite on flexible and stretchable TPU substrate” Sensors and Actuators A: Physical, 274, 109-115, 2018 https://doi.org/10.1016/j.sna.2018.03.003

11.    D. Go, M.Z. Atashbar, Z. Ramshani, and H.C. Chan “Surface acoustic wave devices for chemical sensing and microfluidics: A review and perspective” Analytical Methods, 9, 4112-4134, 2017, DOI: 10.1039/C7AY00690J

12.    S. Emamian, B.B. Narakathu, A. Chlaihawi, B. Bazuin, and M.Z. Atashbar “Screen Printing of Flexible Piezoelectric Based Device on Polyethylene Terephthalate, PET and Paper for Touch and Force Sensing Applications” journal Sensors & Actuators: A. Physical, 263, 639-647, 2017.  https://doi.org/10.1016/j.sna.2017.07.045

13.    A.A. Chlaihawi, S. Emamian1, B.B Narakathu, M.M Ali, D. Maddipatla, B.J. Bazuin, and M.Z. Atashbar, “A Screen Printed and Flexible Piezoelectric Based AC Magnetic Field Sensor”  Sensors and Actuators, 268, 1-8, 2017. https://doi.org/10.1016/j.sna.2017.10.030

14.    Z.  Ramshani, M.J. Johnson, M. Z. Atashbar,  D.B. Go “A broad area electrospray generated by a piezoelectric transformer” Appl. Phys. Lett. 109, 044103, 2016, DOI: 10.1063/1.496015.

15.    S.G.R. Avuthu, J.T. Wabeke, B.B. Narakathu, D. Maddipatla, J. Arachchilage, S.O Obare, M.Z. Atashbar, “A screen printed phenanthroline based flexible electrochemical sensor for selective detection of toxic heavy metal ions”, pp. 8678 - 8684 IEEE Sensors Journal,  2016  DOI: 10.1109/JSEN.2016.2572184.

16.    A. Eshkeiti, A.S.G. Reddy, S. Emamian, B.B. Narakathu, M. Joyce, M.K. Joyce, P.D. Fleming, B.J. Bazuin, M.Z. Atashbar, “Screen printing of multi-layered hybrid printed circuit boards, PCB on different substrates”, IEEE Transactions on Device and Materials Reliability, vol. 5/3, pp. 415-421, 2015.

17.    M.J.  Joyce, A. Eshkeiti, P. D. Fleming III, A. Pekarovicova, M.Z. Atashbar, “Self supported printed multi-layer capacitor”, Journal of Print and Media Technology Research, vol.4, 1, pp. 285-300, 2015.

18.    B.B. Narakathu, A.S.G. Reddy, A. Eshkeiti, S. Emamian, M.Z. Atashbar, “Development of a microfluidic sensing platform by integrating PCB technology and inkjet printing process”, IEEE Sensors Journal, vol. 15, 11, pp. 6374 - 6380, 2015.

19.    S. Emamian, A. Eshkeiti, A.S.G. Reddy, B.B. Narakathu, M.Z. Atashbar, “Gravure printed flexible surface enhanced Raman spectroscopy, SERS substrate for detection of 2,4-dinitrotoluene, DNT vapor”, Sensors and Actuators B: Chemical, vol. 217, 1, pp. 129-135, 2015.

20.    Z. Ramshani, A.S.G. Reddy, B.B. Narakathu, M.Z. Atashbar, “SH-SAW sensor based microfluidic system for the detection of heavy metal compounds in liquid environments”, Sensors and Actuators B: Chemical, vol. 217, 1, pp. 72-77, 2015.

21.    H. Zhu, B.B Narakathu   Z. Fang,  A.T. Aijazi, M. Joyce, M.Z. Atashbarbr, L. Hu  “A gravure printed antenna on shape-stable transparent nanopaper” Nanoscale, 6, 9110-9115, 2014.

  1. M. J.. Joyce , P. D. Fleming III , S. G. Avuthu, S. Emamian, A. Eshkeiti, M.Z. Atashbar, M., T. Donato “Contribution of Flexo Process Variables to Fine Line Ag Electrode Performance”, International Journal of Engineering Research and Technology”, vol. 3, no. 8, pp. 645-1656, 2014.

23.    S. Lim, M. Joyce, P. D. Fleming, A.T. Aijazi, M.Z. Atashbar, “Inkjet Printing and Sintering of Nano copper ink” Journal of Imaging Science and Technology, Vol 57, No.  5, pp. 50506-1-50506-7, 7, 2013.

24.    J.O. Manyala, T. Fritz, M.Z. Atashbar “Gearbox Speed Sensor Design and Performance Optimization” IEEE Sensors Journal, vol. 13, No. 2, pp. 629-636, 2013.

25.    D. Alsaid, E. Rebrosova, M. Joyce, M. Rebros, M.Z. Atashbar, B. Bazuin “Gravure Printing of ITO Transparent Electrodes for Applications in Flexible Electronics” IEEE Journal of Display Technology, vol. 8, No. 7, pp. 391-396, 2012.

26.    J. Manyala, M.Z. Atashbar “Electromagnetic Actuator Dynamic Response Prediction for an Automated Mechanical Transmission”, SAE International Journal of Commercial Vehicles, Vol. 6, No. 1, pp. 1-9, 2013.

27.    J. Manyala, M.Z. Atashbar “On-Line Lubricants Health Condition Monitoring in Gearbox Application”, SAE International Journal of Commercial Vehicles, Vol. 6, No. 1, pp. 907-914, 2013

28.    N. Ghafouri, H. Kim, M.Z. Atashbar, R. Peterson, K. Najafi "Design and Fabrication of a Thermoelectric Energy Scavenger for Powering Hybrid Insects" IEEE Sensors Journal, Submitted.

29.    B.B. Narakathu, M.S. Devadas, A. S. G. Reddy, A. Eshkeiti, A. Moorthi, I.R. Fernando, B. Miller, G. Ramakrishna, E. Sinn, M. Joyce, M. Rebros, E. Rebrosova, G. Mezei and M.Z. Atashbar, “Novel Fully Screen Printed Flexible Electrochemical Sensor for the Investigation of Electron Transfer between Thiol Functionalized Viologen and Gold Clusters”, Sensors and Actuators B: Chemical, vol. 176, pp. 768-774, 2012.

30.    A. Eshkeiti, B.B. Narakathu, A.S.G. Reddy, A. Moorthi, M.Z. Atashbar, “Detection of Toxic Heavy Metals Using A Novel Inkjet Printed Surface Enhanced Raman Spectroscopy, SERS Substrate”, Sensors and Actuators B: Chemical, vol. 171-172, pp. 705-711, 2012.

31.    B.R. Young, T.L. Young, M.K. Joyce, S. Kennedy, M.Z. Atashbar "Future Opportunities for Advancing Glucose Test Device Electronics" Journal of Diabetes Science and Technology, September 2011, Volume 5, Issue 5, pp. 1077-1086, 2011.

32.    J.O. Manyala, T. Fritz,   M.Z. Atashbar “Integration of tri-axial hall effect sensor technology in gear position sensing in a commercial vehicle transmission” IEEE Transactions on Instrumentation and Measurement  no.99, pp.1-9, 2011.

33.    C.J. Cheng, C.T. Feng, M.Z. Atashbar, W. Wlodarski, K. Kantar-Zadeh “Guided SH-SAW sensing system for liquid viscosity sensing applications” Sensor Letters, 9, 605-608, 2011.

34.    V. Venkataraman, M.Z. Atashbar, B. Bejcek “Investigation of capacitive transducer for bio/chemical sensing” Sensor Letters 9, 890-893, 2011.

35.    B.B. Narakathu, W. Guo, S.O. Obare, M.Z. Atashbar, “Novel approach for detection of toxic organophosphorus compounds”, Sensors and Actuators B: Chemical, vol. 158, pp. 69-74, 2011.

36.    B.B. Narakathu, B.E. Bejcek and M.Z. Atashbar, “Pico mole level detection of toxic biochemical species using impedance based electrochemical biosensors”, Sensor Letters, vol. 9, pp. 872-875, 2011.

37.    B.B. Narakathu, W. Guo, S.O. Obare, M.Z. Atashbar, “Detection of picomolar levels of toxic organophosphorus compounds by electrochemical and fluorescence spectroscopy”, Sensor Letters, vol. 9, pp. 907-909, 2011.

38.    A.S.G. Reddy, B.B. Narakathu, M.Z. Atashbar, M. Rebros, E. Hrehorova, B.J. Bazuin, M.K. Joyce, P.D. Fleming, A. Pekarovicova, “Printed capacitive based humidity sensors on flexible substrates”, Sensor Letters, vol. 9, pp. 869-871, 2011.

39.    B.B. Narakathu, B.E. Bejcek, M.Z. Atashbar, “Improved detection limits of toxic biochemical species based on impedance measurements in electrochemical biosensors”, Biosensors and Bioelectronics, vol. 26, pp. 923–928, 2010.

40.    M.Z. Atashbar, A.Z. Sadek, W. Wlodarski, S. Sriram, M. Bhaskaran, C.J. Cheng, R.B. Kaner, and K. Kalantar-zadeh “Layered SAW gas sensor based on CSA synthesized polyaniline nanofiber on AlN on 64º YX LiNbO3 for H2 sensing” Sensors and Actuators B, 138, pp. 85-89, 2009.

41.    S. Krishnamurthy, M.Z. Atashbar, B. Bazuin “Burst transceiver unit for wireless passive SAW sensing system” IEEE Transactions on Instrumentation and Measurement, 58, 10, pp. 3746-3753, 2009.

42.    C. Baratto, M.Z. Atashbar, G. Faglia, G. Sberveglieri “Functionalized single wall carbon nanotubes based gas sensor” Journal of Nanoengineering and Nanosystems, 221, N1, pp. 17-21, 2007.

43.    M.Z. Atashbar, B. Bejcek S. Singamaneni “Carbon nanotube network based biomolecule detection” IEEE Sensors Journal, 6, 3, pp. 524- 528, 2006.

44.    V.N. Bliznyuk, S. Singamaneni, R. Kattumenu, M.Z. Atashbar “Surface electrical conductivity in ultrathin single-wall carbon nanotube/polymer nanocomposite films” Applied Physics Letters, 88, pp. 164101-164103, 2006.

45.    Min-Feng Yu, M.Z. Atashbar X.L. Chen “Mechanical and electrical characterization of b-Ga2O3 nanostructures for sensing applications” IEEE Sensors Journal, 5, 1, pp. 20-25, 2005., Selected as Journal Issue Cover Page.

  1. M.Z. Atashbar, D. Banerji, S. Singamaneni “Room temperature hydrogen sensor based on palladium nanowires” IEEE Sensors Journal, 5, 5, pp. 792-797, 2005.
  2. M.Z. Atashbar, B. Bejcek, A. Vijh, S. Singamaneni “QCM Biosensor with ultra thin polymer film” Sensors and Actuators B, 107, 2, pp. 945-951, 2005.
  3. M.Z. Atashbar and S. Singamaneni “Comparative studies of temperature dependence of ‘G’ band peak in SWNT and HOPG” Applied physics Letters, 86, pp. 123112-1 to 123112-3, 2005.
  4. M.Z. Atashbar, D. Banerji, S. Singamaneni, V. Bliznyuk “Polystyrene palladium nanocomposite for hydrogen sensing” Molecular Crystals and Liquid Crystals 427, pp. 217-224, 2005.
  5. M.Z. Atashbar and S. Singamaneni “Template based fabrication of metal nanostructures for gas sensing applications” Invited paper Journal of Nanoengineering and Nanosystems, pp. 83-89, 2005.
  6. M.Z. Atashbar, B. Bazuin, M. Simpeh, S. Krishnamurthy “3-D FE simulation of H2 SAW Gas sensor” Sensors and Actuators B: Chemicals, 111-112, pp. 213-218, 2005.
  7. M.Z. Atashbar and S. Singamaneni “Room temperature gas sensor based on metallic nanowires” Sensor and Actuators, 111-112, pp. 13-21, 2005.
  8. M.Z. Atashbar, V. Bliznyuk, D. Banerji, S. Singamaneni “Deposition of parallel arrays of palladium nanowires on highly oriented pyrolytic graphite” Journal of Alloys and Compounds, 372, pp. 107-110, 2004.
  9. M.Z. Atashbar, D. Banerji, S. Singamaneni, V. Bliznyuk “Deposition of parallel arrays of palladium nanowires and electrical characterization using microelectrode contacts” Nanotechnology, 15, 3, pp. 374 – 378, 2004.
  10. M.Z. Atashbar, B.J. Bazuin, S. Krishnamurthy “Performance evaluation of SAW devices by simulation” International Journal of Simulation and Modeling, 24, 4, pp. 250-263, 2004.
  11. J. Khazzai and M.Z. Atashbar “Optical edge enhancement based on edge patterns and fuzzy logic” Integrated Computer-Aided Engineering – An International Journal 9, 2, pp. 167-174, 2002.
  12. C. Cantalini, W. Wlodarski, H.T. Sun, M.Z. Atashbar, M. Passacantando S. Santucci “NO2 response of In2O3 thin film gas sensors prepared by sol-gel and vacuum thermal evaporation techniques” Sensors and Actuators, 65, 1/3, pp. 101-104, 2000.
  13. G. Sberveglieri, G. Faglia, E. Comini, M.Z. Atashbar, W. Wlodarski “Titanium dioxide thin films prepared for alcohol microsensor applications” Sensors and Actuators, 66, 1/3, pp. 139-141, 2000.

59.    M.Z Atashbar, B. Gong, H.T. Sun, W. Wlodarski, R.N. Lamb “Investigation on ozone-sensitive In2O3 thin films” Thin Solid Films, 354, 1/2, pp. 222-226, 1999.

  1. C. Cantalini, W. Wlodarski, H.T. Sun , M.Z. Atashbar, G. Sulli, L. Lozzi, S. Santucci “Investigation on the cross sensitivity of NO2 sensors based on In2O3 thin films prepared by sol-gel and vacuum thermal evaporation techniques” Thin Solid Films, 350, 1/2, pp. 276-282, 1999.
  2. C. Cantalini. M.Z. Atashbar, Y. Li, M.K. Ghantasala, S. Santucci, W. Wlodarski “Characterization of sol-gel prepared WO3 thin films as a gas sensor” Journal of American Vaccum Science and Technology, 17, 4, pp. 1873-1879, 1999.
  3. M.Z. Atashbar, H.T. Sun, B. Gong, W. Wlodarski, R. Lamb “XPS study of a Nb-doped oxygen sensing TiO2 thin films prepared by sol-gel” Thin Solid Films, 326, 1/2, pp. 238-244, 1998.
  4. M.Z. Atashbar and W. Wlodarski “Design, simulation and fabrication of doped TiO2-coated surface acoustic wave oxygen sensor” Journal of Intelligent Material Systems and Structures, 8, pp. 953-959, 1997.

 

Conference papers:

64.    M. Ochoa, R. Rahimi, J. Zhou, H. Jiang, C.K. Yoon, M. Oscai, V. Jain, T. Morken, R.H. Oliveira, D. Maddiplata, B.B. Narakathu, G.L. Campana, M.A. Zieger, R. Sood, M.Z. Atashbar, B. Ziaie “A manufacturable smart dressing with oxygen delivery and sensing capability for chronic wound management” Micro-and Nanotechnology Sensors, Systems, and Applications X. Vol. 10639, 106391C, International Society for Optics and Photonics, 2018. https://doi.org/10.1117/12.2306083

65.    X. Zhang, B.B. Narakathu, D. Maddipatla, V.S. Turkani, B.J. Bazuin, M.Z. Atashbar, “Digital signal processing and analysis of cardiopulmonary audio using a multi-channel stethograph system”, IEEE Sensors Conference, October 28-31, New Delhi, India, 2018 (Submitted).

66.    D. Maddipatla, B.B. Narakathu, V.S. Turkani, S. Hajian, B.J. Bazuin, M.Z. Atashbar, “A flexible copper based electrochemical sensor using laser-assisted patterning process”, IEEE Sensors Conference, October 28-31, New Delhi, India, 2018 (Submitted).

67.    V.S. Turkani, B.B. Narakathu, D. Maddipatla, B.N. Altay, P.D. Fleming B.J. Bazuin, M.Z. Atashbar, “Nickel based resistance temperature detector (RTD) on flexible polyimide substrate”, IEEE Sensors Conference, October 28-31, New Delhi, India, 2018 (Submitted).

68.    S. Hajian, P. Khakbaz, M. Moshayedi, D. Maddipatla, B.B. Narakathu, V.S. Turkani, B.J. Bazuin, M. Pourfath, M.Z. Atashbar, “Impact of different ratios of fluorine, oxygen and hydroxyl surface terminations on Ti3C2Tx MXene as ammonia sensor: A first-principles study”, IEEE Sensors Conference, October 28-31, New Delhi, India, 2018 (Submitted).

69.    A.K. Bose, C.L. Beaver, B.B. Narakathu, Silvia Rossbach, B.J. Bazuin, M.Z. Atashbar, “Development of flexible microplasma discharge device for sterilization applications”, IEEE Sensors Conference, October 28-31, New Delhi, India, 2018 (Submitted).

70.    D. Maddipatla, B.B. Narakathu, V.S. Turkani, B.J. Bazuin, M.Z. Atashbar, “A Gravure Printed Flexible Electrochemical Sensor for the Detection of Heavy Metal Compounds”, Eurosensors Conference, September 9-12, Graz, Austria, 2018 (Accepted).

71.    A.K. Bose, B.B. Narakathu, B.J. Bazuin, M.Z. Atashbar, “Modelling and Simulation of Microplasma Discharge Device for Sterilization Applications”, Eurosensors Conference, September 9-12, Graz, Austria, 2018 (Accepted).

72.    X. Zhang, A.K. Bose, D. Maddipatla, B.B. Narakathu, V.S. Turkani, M.Z. Atashbar, “Design, Simulation and Fabrication of a Novel MEMS Based Pulsometer”, Eurosensors Conference, September 9-12, Graz, Austria, 2018 (Accepted).

73.    X. Zhang, B. B. Narakathu, D. Maddipatla, B. J. Bazuin, M. Z. Atashbar, “Development of a Novel Wireless Multi-Channel Stethograph System for Diagnosing Pulmonary and Cardiovascular Diseases”, 17th International Meeting on Chemical Sensors (IMCS), July 15-19, Vienna, Austria, pp. 673-674, 2018, DOI: 10.5162/IMCS2018/P1DH.10

74.    V. S. Turkani, D. Maddipatla, B. B. Narakathu, B. J. Bazuin, M. Z. Atashbar, “A Fully Printed CNT Based Humidity Sensor on Flexible PET Substrate”, 17th International Meeting on Chemical Sensors (IMCS), July 15-19, Vienna, Austria, pp. 519-520, 2018, DOI: 10.5162/IMCS2018/P1FW.5.

75.    A. K. Bose, D. Maddipatla, B. B. Narakathu, V. S. Turkani, B. J. Bazuin, M. Z. Atashbar, “Flexible Microplasma Discharge Device for the Detection of Biochemicals”, 17th International Meeting on Chemical Sensors (IMCS), July 15-19, Vienna, Austria, pp. 419-420, 2018, DOI: 10.5162/IMCS2018/ME.4.

76.    D. Maddipatla, B. B. Narakathu, V. S. Turkani, B. J. Bazuin, M. Z. Atashbar, “Development of a Gravure Printed Flexible Electrochemical Sensor”, 17th International Meeting on Chemical Sensors (IMCS), July 15-19, Vienna, Austria, 2018 pp. 734-735, 2018, DOI: 10.5162/IMCS2018/P2EC.19.

77.    V. S. Turkani, D. Maddipatla, B. B. Narakathu, B. J. Bazuin, M. Z. Atashbar, “A printed and flexible CNT based negative temperature coefficient thermistor”, 28th Anniversary World Congress on Biosensors, June 12-15, Florida, USA, 2018 (Accepted).

78.    D. Maddipatla, B. B. Narakathu, V. S. Turkani, B. J. Bazuin, M. Z. Atashbar, “Development of a fully printed flexible paper based electrochemical sensor”, 28th Anniversary World Congress on Biosensors, June 12-15, Florida, USA, 2018 (Accepted).

79.    V. S. Turkani, D. Maddipatla, B. B. Narakathu, B. J. Bazuin, M. Z. Atashbar, “A Fully Printed Carbon Nanotube (CNT) Based Thermistor”, Flexible and Printed Electronics Conference (FlexTech), February 12-15, Monterey, California, USA, 2018.

80.    D. Maddipatla, B. B. Narakathu, V. S. Turkani, B. J. Bazuin, M. Z. Atashbar, “Development of a Flexible Strain Gauge on Paper Based Platform Using Additive Printing Process”, Flexible and Printed Electronics Conference (FlexTech), February 12-15, Monterey, California, USA, 2018.

81.    D. Maddipatla, B. B. Narakathu, V. S. Turkani, B. J. Bazuin, M. Z. Atashbar, “A Novel and Flexible Screen Printed Electrochemical Sensor on Paper Substrate”, Flexible and Printed Electronics Conference (FlexTech), February 12-15, Monterey, California, USA, 2018

82.    D Maddipatla, BB Narakathu, M.M. Ali, AA Chlaihawi, M.Z. Atashbar “Development of a novel carbon nanotube based printed and flexible pressure sensor, IEEE Sensors Applications Symposium, SAS, pp. 1-4, 2017.

83.    D. Maddipatla, B.B. Narakathua, B. Bazuin, M.A. Atashbar “Investigation of silver and carbon nanotube based printed pressure sensors” FlexTech, February 29-March 3, Monterey, California, USA, pp. 1, 2017.

84.    F. Aljanabi, M.M.  Ali, D. Maddipatla, B.B. Narakathua, B. Bazuin, M.A. Atashbar “Wrinkle-structure based SERS substrate for drug detection applications” FlexTech, February 29-March 3, Monterey, California, USA, pp. 1, 2017.

85.    Z. Ramshani, M.Z. Atashbar, P. Gao, W. Phillip, D.B. Go “Piezoelectric Transformer-Driven Spray Coating for Membrane Sensor Fabrication” 15th IEEE Sensors Conference, October 30 – November 2, Orlando, Florida, USA, pp. 142-144, 2016.

86.    A.A. Chlaihawi, S. Emamian, B.B. Narakathu, B.J. Bazuin, M.Z. Atashbar, “Novel screen printed and flexible low frequency magneto-electric energy harvester”, 15th IEEE Sensors Conference, October 30 – November 2, Orlando, Florida, USA, pp. 1622-1624, 2016.

87.    D. Maddipatla, B.B. Narakathu, B.J. Bazuin, M.Z. Atashbar, “Development of a printed impedance based electrochemical sensor on paper substrate”, 15th IEEE Sensors Conference, October 30 – November 2, Orlando, Florida, USA, pp. 1138-1140, 2016.

88.    F. Aljanabi, B.B. Narakathu, S. Emamian, M.M. Ali, B.J. Bazuin, M.Z. Atashbar, “Detection of cocaine using gravure printed silver nanoparticle based SERS substrate”, 15th IEEE Sensors Conference, October 30 – November 2, Orlando, Florida, USA, pp. 700-702, 2016.

89.    M.M. Ali, B.B. Narakathu, S. Emamian, A.A. Chlaihawi, F. Aljanabi, D. Maddipatla, B.J. Bazuin, M.Z. Atashbar, “Eutectic Ga-In liquid metal based flexible capacitive pressure sensor”, 15th IEEE Sensors Conference, October 30 – November 2, Orlando, Florida, USA, pp. 352-354, 2016.

90.    S. Emamian, A.A. Chlaihawi, B.B. Narakathu, B.J. Bazuin, M.Z. Atashbar, “A piezoelectric based vibration energy harvester fabricated using screen printing technique”, 15th IEEE Sensors Conference, October 30 – November 2, Orlando, Florida, USA, pp. 485-487, 2016.

91.    J.O. Manyala, M.Z. Atashbar “Development of Particle Contaminants Monitor System for Gearbox Lubricant Prognostics”  15th IEEE Sensors Conference, October 30 – November 2, Orlando, Florida, USA, pp. 1481-1483, 2016.

92.    A.A. Chlaihawi, S. Emamian, B.B. Narakathu, M.M. Ali, D. Maddipatla, B.J. Bazuin, M.Z. Atashbar, “Novel screen printed flexible magnetoelectric thin film sensor”, 30th Eurosensors Conference, September 4-7, Budapest, Hungary, pp. 1806-1809, 2016.

93.    S. Emamian, A.A. Chlaihawi, B.B. Narakathu, M.Z. Atashbar, “Fabrication and characterization of piezoelectric paper based device for touch and force sensing applications”, 30th Eurosensors Conference, September 4-7, Budapest, Hungary, pp. 1786-1789, 2016.

94.    B.B. Narakathu, A.S.G. Reddy, D. Maddipatla, S. Emamian, A. Eshkeiti, A.A. Chlaihawi, B.J. Bazuin, M.Z. Atashbar, “Rapid prototyping of a flexible microfluidic sensing system using inkjet and screen printing processes”, 14th IEEE Sensors Conference, November 1-4, Busan, South Korea, pp. 654-657, 2015.

95.     S.G.R. Avuthu, J.T. Wabeke, B.B. Narakathu, D. Maddipatla, S. Emamian, A. Eshkeiti, A.A. Chlaihawi, M.K. Joyce, S.O. Obare, M.Z. Atashbar, “Development of screen printed electrochemical sensors for selective detection of heavy metals”, 14th IEEE Sensors Conference, November 1-4, Busan, South Korea, pp. 490-493, 2015.

96.     S.G.R. Avuthu, J.T. Wabeke, B.B. Narakathu, D. Maddipatla, S. Emamian, A. Eshkeiti, A.A. Chlaihawi, B.J. Bazuin, S.O. Obare, M.Z. Atashbar, “Detection of heavy metal ions using screen printed wireless LC sensor”, 14th IEEE Sensors Conference, November 1-4, Busan, South Korea, pp. 494-497, 2015.

97.    D. Maddipatla, B.B. Narakathu, S.G.R. Avuthu, S. Emamian, A. Eshkeiti, A.A. Chlaihawi, B.J. Bazuin, M.K. Joyce, C.W. Barrett, M.Z. Atashbar, “A novel flexographic printed strain gauge on paper platform”, 14th IEEE Sensors Conference, November 1-4, Busan, South Korea, pp. 1657-1660, 2015.

98.    S. Emamian, S.G.R. Avuthu, B.B. Narakathu, A. Eshkeiti, A.A. Chlaihawi, B.J. Bazuin, M.Z. Atashbar, “Fully printed and flexible piezoelectric based touch sensitive skin”, 14th IEEE Sensors Conference, November 1-4, Busan, South Korea, pp. 1827-1830, 2015.

99.    A.A. Chlaihawi, B.B. Narakathu, S. Emamian, A. Eshkeiti, S.G.R. Avuthu, B.J. Bazuin, M.Z. Atashbar, “Development of flexible dry ECG electrodes based on MWCNT/PDMS composite”, 14th IEEE Sensors Conference, November 1-4, Busan, South Korea, pp. 221-224, 2015.

100.A. Eshkeiti, Z. Ramshani, S. Emamian, B.B. Narakathu, A.S.G. Reddy, M.M. Ali, A. Chlaihawi, M.K. Joyce, D.P. Fleming, B.J. Bazuin, M.Z. Atashbar, “A stretchable and wearable printed sensor for human body motion monitoring”, 14th IEEE Sensors Conference, November 1-4, Busan, South Korea, pp. 934-937, 2015.

101.A.A. Chlaihawi, B.B. Narakathu, A. Eshkeiti, S. Emamian, A.S.G. Reddy, M.Z. Atashbar, “Screen printed MWCNT/PDMS based dry electrode sensor for electrocardiogram, ECG measurements”, IEEE International Conference on Electro/Information Technology, EIT, May 21-23, Dekalb, Illinois, USA, pp. 526-529, 2015.

102.Z. Ramshani, B.B. Narakathu, A.S.G. Reddy, S. Obare, M.Z. Atashbar, “SH-SAW sensor based heavy metal detection”, Joint Conference of the IEEE International Frequency Control Symposium & European Frequency and Time Forum, IFCS-EFTF, April 12-16, Denver, Colorado, USA, pp. pp. 536-540, 2015.

103.S. Emamian, A. Eshkeiti, B.B. Narakathu, A.S.G. Reddy, M.Z. Atashbar, “Detection of 2,4-dinitrotoluene, DNT using gravure printed surface enhancement Raman spectroscopy, SERS flexible substrate”, Flexible and Printed Electronics Conference, FlexTech, February 23-26, Monterey, California, USA, pp. 1, 2015.

104.S.G.R. Avuthu, B.B. Narakathu, A. Eshkeiti, S. Emamian, B.J. Bazuin, M. Joyce, M.Z. Atashbar, “Detection of Heavy Metals Using Fully Printed Three Electrode Electrochemical Sensor”, 13th IEEE Sensors Conference, November 2-5, 2014, Valencia, Spain,pp.669-672.

105.B.B. Narakathu, S.G.R. Avuthu, A. Eshkeiti, S. Emamian, M.Z. Atashbar, “Development of a Novel Printed Flexible Microfluidic Sensing Platform Based on PCB Technology”, 13th IEEE Sensors Conference, November 2-5, 2014, Valencia, Spain, pp. 665-668

106.A. Eshkeiti, M.J. Joyce, B.B. Narakathu, S. Emamian, S.G.R. Avuthu, M. Joyce, M.Z. Atashbar, “A Novel Self-Supported Printed Flexible Strain Sensor for Monitoring Body Movement”, 13th IEEE Sensors Conference, November 2-5, 2014, Valencia, Spain, pp.1069-1072.

107.A. Eshkeiti, S. Emamian, S.G.R. Avuthu, B.B. Narakathu, M.J. Joyce, M. Joyce, M.Z. Atashbar, “Screen Printed Flexible Capacitive Pressure Sensor”, 13th IEEE Sensors Conference, November 2-5, 2014, Valencia, Spain, pp. 1192-1195.

108.S. Emamian, A. Eshkeiti, B.B. Narakathu, S.G.R. Avuthu, M.Z. Atashbar, “Detection of 2,4-Dinitrotoluene, DNT Using Gravure Printed Surface Enhancement Raman Spectroscopy, SERS Flexible Substrate”, 13th IEEE Sensors Conference, November 2-5, 2014, Valencia, Spain, pp. 1615-1618.

109.B.B. Narakathu, A.S.G. Reddy, A. Eshkeiti, S. Emamian, M.Z. Atashbar, “A novel flexible microfluidic platform: Integration of conventional printed circuit board technology and inkjet printing”, 24th Anniversary World Congress on Biosensors, BIOSENSORS, May 27-30, Melbourne, Australia, pp. 120-121, 2014.

110.B.B. Narakathu, A. Eshkeiti, A.S.G. Reddy, S. Emamian, M.K. Joyce, P.D. Fleming, B.J. Bazuin, M.Z. Atashbar, “PDMS Based Flexible Capacitive Pressure Sensor Fabricated Using Printing Technology”, Flexible and Printed Electronics Conference, FlexTech, February 4-6, Phoenix, Arizona, USA, pp. 47,  2014.

111.B.B. Narakathu, M.S. Devadas, A.S.G. Reddy, A. Eshkeiti, G. Ramakrishna, E. Sinn, M.K. Joyce, G. Mezei, M.Z. Atashbar, “Investigation of electron transfer between gold clusters and, pseudo rotaxanes using a novel screen printed flexible electrochemical sensor”, Flexible and Printed Electronics Conference, FlexTech, February 4-6, Phoenix, Arizona, USA, pp. 46, 2014.

112.A.S.G. Reddy, B.B. Narakathu, A. Eshkeiti, S. Emamian, B.J. Bazuin, M.K. Joyce, M.Z. Atashbar, “All screen printed circular electrodes as electrochemical sensors”, Flexible and Printed Electronics Conference, FlexTech, February 4-6, Phoenix, Arizona, USA, pp. 45, 2014.

113.A.S.G. Reddy, B.B. Narakathu, S. Emamian, A. Eshkeiti, M.K. Joyce, B.J. Bazuin, M.Z  Atashbar, “Fully printed electrochemical sensor on flexible substrates”, Flexible and Printed Electronics Conference, FlexTech, February 4-6, Phoenix, Arizona, USA, pp. 45, 2014.

114.A. Eshkeiti, A.S.G. Reddy, B.B. Narakathu, S. Emamian, M. Rezaei, M.K. Joyce, P.D. Fleming, B.J. Bazuin, M.Z. Atashbar, “Screen printed capacitive pressure sensor”, Flexible and Printed Electronics Conference, FlexTech, February 4-6, Phoenix, Arizona, USA, pp. 45, 2014.

115.B.B. Narakathu, A.S.G. Reddy, A. Eshkeiti, B.J. Bazuin, M.Z. Atashbar, “A novel flow cell for opto-electrochemical based dual sensing of heavy metal compounds”, 15th International Meeting on Chemical Sensors, IMCS, March 16-19, Beunos Aires, Argentina, pp. 48, 2014.

116.A.S.G. Reddy, B.B. Narakathu, S. Emamian, A. Eshkeiti, B.J. Bazuin, M.K. Joyce, M.Z. Atashbar, “All printed pentacene organic thin film transistors for humidity sensing”, 15th International Meeting on Chemical Sensors, IMCS, March 16-19, Beunos Aires, Argentina, pp. 107, 2014.

117.A.S.G. Reddy, B.B. Narakathu, A. Eshkeiti, S. Emamian, B.J. Bazuin, M.K. Joyce, M.Z. Atashbar, “All screen printed circular electrodes as electrochemical sensors”, 15th International Meeting on Chemical Sensors, IMCS, March 16-19, Beunos Aires, Argentina, pp. 98, 2014.

118.S. Emamian, A. Eshkeiti, B.B. Narakathu, M.Z. Atashbar, “Detection of 2,4-dinitrotoluene, DNT using gravure printed surface enhanced Raman spectroscopy, SERS flexible substrate”, 15th International Meeting on Chemical Sensors, IMCS, March 16-19, Beunos Aires, Argentina, pp. 86, 2014.

119.Z. Ramshani, B.B. Narakathu, A.S.G. Reddy, M.Z. Atashbar, “Heavy metal detection using shear horizontal surface acoustic wave, SH-SAW sensors”, 15th International Meeting on Chemical Sensors, IMCS, March 16-19, Beunos Aires, Argentina, pp. 88, 2014.

120.M. Rezaei, A. Eshkeiti, P. Aminayi, B.B. Narakathu, M.Z. Atashbar, “Detection of heavy metal compounds using a novel inkjet printed surface enhanced Raman spectroscopy, SERS substrate based on metallic triangular nano structures”, 15th International Meeting on Chemical Sensors, IMCS, March 16-19, Beunos Aires, Argentina, pp. 86, 2014.

121.M. Rezaei, A. Eshkeiti, P. Aminayi, Z. Ramshani, B.B. Narakathu, M. Z. Atashbar, “A novel inkjet printed surface enhanced Raman spectroscopy, SERS substrate based on Marangoni effect for the detection of heavy metal compounds”, 15th International Meeting on Chemical Sensors, IMCS, March 16-19, Beunos Aires, Argentina, pp. 120, 2014.

122.B.B. Narakathu, A.S.G. Reddy, A. Eshkeiti, B.J. Bazuin, M.Z. Atashbar, “Opto-Electrochemical Based Dual Detection of Heavy Metal Compounds Using a Novel Flow Cell”, 12th IEEE Sensors Conference, November 3-6, 2013, Baltimore, Maryland, USA, pp 834-837, 2013.

123.Z. Ramshani, B.B. Narakathu, S. Emamian A.S.G. Reddy, M.Z. Atashbar, “Investigation of SH-SAW Sensors for Toxic Heavy Metal Detection”, 12th IEEE Sensors Conference, November 3-6, 2013, Baltimore, Maryland, USA,pp. 1514-1517, 2013.

124.A. Eshkeiti, M. Rezaei, B.B. Narakathu, A.S.G. Reddy, M.Z. Atashbar, “Gravure printed paper based substrate for detection of heavy metals using surface enhanced Raman spectroscopy, SERS”, 12th IEEE Sensors Conference, November 3-6, 2013, Baltimore, Maryland, USA, pp.667-674, 2013.

125.A.S.G. Reddy, A. Eshkeiti, B.B. Narakathu, B. J. Bazuin, M. Joyce, M.Z. Atashbar, “Fully Printed OTFT Based Flexible Humidity Sensors”, 12th IEEE Sensors Conference, November 3-6, 2013, Baltimore, Maryland, USA, pp.729-732, 2013.

126.Z. Ramshani, B.B. Narakathu, M.Z. Atashbar, K. Ro, J.C. Song, D. Lee, C.H. Lee, “Design of a novel 3D localization and identification system using surface acoustic, SAW devices”, IEEE International Conference on Electro/Information Technology, EIT, May 9 – 11, 2013, Rapid City, South Dakota, USA, pp.1-4, 2013.

127.B.B. Narakathu, A.S.G. Reddy, A. Eshkeiti, B.J. Bazuin, M.K. Joyce, M.Z. Atashbar, “Detection of iosensorl using a gravure printed flexible electrochemical sensor”, Flexible and Printed Electronics Conference, January 29 – February 1, 2013, Phoenix, Arizona, USA, pp. 18, 2013.

128.A.S.G. Reddy, B.B. Narakathu, A. Eshkeiti, M. Joyce, B. J. Bazuin, M.Z. Atashbar, “Heavy metal detection using a flexible wireless printed LC sensor”, Flexible and Printed Electronics Conference, January 29 – February 1, 2013, Phoenix, Arizona, USA, pp. 17, 2013.

129.A. Eshkeiti, A.S.G. Reddy, B.B. Narakathu, M. Joyce, B.J. Bazuin, M.Z. Atashbar, “Detection of toxic heavy metals using a flexible printed surface enhanced Raman spectroscopy, SERS substrate”, Flexible and Printed Electronics Conference, January 29 – February 1, 2013, Phoenix, Arizona, USA, pp. 17-18, 2013.

130.B.B. Narakathu, A. Eshkeiti, A.S.G. Reddy, A. Moorthi, M.Z. Atashbar, “A Novel Fully Printed and Flexible Capacitive Pressure Sensor”, 11th IEEE Sensors Conference, October 28-31, 2012, Taipei, Taiwan, pp. 1935-1938.

131.A. Eshkeiti, B.B. Narakathu, A.S.G. Reddy, A. Moorthi, M.Z. Atashbar, “Gravure printed Surface Enhanced Raman Spectroscopy, SERS substrate for detection of toxic heavy metals”, 11th IEEE Sensors Conference, October 28-31, 2012, Taipei, Taiwan, pp. 434-437, 2012.

132.C.J. Cheng, C.T. Feng, M. Z. Atashbar, K. Ro, J.C. Song, D. Lee, and C. Lee “Design and Modeling of a Passive Wireless SAW Transponder” 11th IEEE Sensors Conference, October 28-31, 2012, Taipei, Taiwan, pp. 1172-1175, 2012.

133.A. Eshkeiti, B.B. Narakathu, A.S.G. Reddy, A. Moorthi, M.Z. Atashbar, E. Rebrosova, M.Rebros, M. Joyce “Detection of Toxic Heavy Metals Using A Novel Flexible Gravure Printed Surface Enhanced Raman Spectroscopy, SERS Based Substrate” APCOT 2012

134. A. Moorthi, B.B. Narakathu, A.S.G. Reddy, A. Eshkeiti, M.Z. Atashbar, “Development of a Novel Fully Screen Printed Flexible Resistive Strain Gauge”, the 6th International Conference on Sensing Technology: ICST 2012, December 18-21, 2012, Kolkata, India, pp. 765-768, 2012.

135.B.B. Narakathu, F. A. Abebe, C. S. Eribal, M. Z. Atashbar, E. Sinn, “Detection of Zn2+ ions using a novel chemosensor based on coumarin Schiff-base derivatives by electrochemical and fluorescence spectroscopy”, 14th International Meeting on Chemical Sensors, May 20-23, 2012, Nuremberg, Germany, pp. 690-693, , 2012.

136.A.S.G. Reddy, B.B. Narakathu, A. Eshkeiti, A. Moorthi, M. Z. Atashbar, M. Rebros, E. Rebrosova, M. Joyce, “Fully printed Wireless LC sensor for toxic heavy metal detection”, 14th International Meeting on Chemical Sensors, May 20-23, 2012, Nuremberg, Germany, pp. 1191-1194, 2012.

137.A. Eshkeiti, B.B. Narakathu, A.S.G. Reddy, A. Moorthi, M.Z. Atashbar, E. Rebrosova, M. Rebros, M. Joyce, “A Novel Flexible Gravure Printed Surface Enhanced Raman Spectroscopy, SERS Sensor for the Detection of Toxic Heavy Metals”, 14th International Meeting on Chemical Sensors, May 20-23, 2012, Nuremberg, Germany, pp.1479-1482, 2012.

138.A.S.G. Reddy, B.B. Narakathu, M.Z. Atashbar, M. Rebros, E. Rebrosova, M.K. Joyce, “Gravure Printed Electrochemical Biosensors”, 25th Eurosensors Conference, September 4 – 7, 2011, Athens, vol. 25, pp. 956-959, 2011.

139.A.S.G. Reddy, B.B. Narakathu, M.Z. Atashbar, M. Rebros, E. Rebrosova, M.K. Joyce, “Fully Printed Flexible Humidity Sensor”, 25th Eurosensors Conference, September 4 – 7, 2011, Athens, Greece, vol. 25, pp. 120-123, 2011.

140.A. Eshkeiti, B.B. Narakathu, A.S.G. Reddy, A. Moorthi, M.Z. Atashbar, “A Novel Inkjet Printed Surface Enhanced Raman Spectroscopy, SERS Substrate for the Detection of Toxic Heavy Metals”, 25th Eurosensors Conference, September 4 – 7, 2011, Athens, Greece, vol. 25, pp. 338-341 2011.

141.B.B. Narakathu, A.S.G. Reddy, M.Z. Atashbar, M.K. Joyce, “A Novel Gravure Printed Impedance Based Flexible Electrochemical Sensor”, 10th IEEE Sensors Conference, October 28-31, 2011, Limerick, Ireland, pp. 577-580, 2011.

142.C.T. Feng, C.J. Cheng, M.Z. Atashbar, “PMMA/64° YX-LiNbO3 Guided SH-SAW Based Immunosensing System”, 10th IEEE Sensors Conference, October 28-31, 2011, Limerick, Ireland, pp. 308-311, 2011.

143.A.S.G. Reddy, B.B. Narakathu, M.Z. Atashbar, M. Rebros, E. Hrehorova, M. Joyce “Flexible Electrochemical Biosensor Using Rotogravure Printing” 10th Annual Flexible Electronics and Displays Conference, February 7 – 10, 2011, Phoenix, AZ, pp. 37, 2011.

144.A.S.G. Reddy, B.B. Narakathu, M.Z. Atashbar, M. Rebros, E. Hrehorova, M. Joyce “Printed Wireless Humidity Sensors On Flexible Substrates” 10th Annual Flexible Electronics and Displays Conference, February 7 – 10, 2011, Phoenix, AZ, pp. 37, 2011.

145.D. Alsaid, E. Hrehorova, M.K. Joyce, M.Z. Atashbar, M. Rebros “Gravure Printing of ITO-based Transparent Electrodes for Applications in Flexible Electronics” Flextech 10th Annual Flexible Electronics and Displays Conference, February 7 – 10, 2011, Phoenix, AZ, pp.28, 2011.

146.A.S.G. Reddy, B.B. Narakathu, M.Z. Atashbar, M. Rebros, E. Hrehorova, M. Joyce ”Printed electrochemical based biosensors on flexible substrates” IEEE Sensors Conference, November 1-4, 2010, Waikoloa, HI, USA, pp. 1596-1600, 2010.

147.B.B. Narakathu, W. Guo, S.O. Obare, M.Z. Atashbar “Electrochemical Impedance Spectroscopy Sensing of Toxic Organophosphorus Compounds” IEEE Sensors Conference, November 1-4, 2010, Waikoloa, HI, USA. Pp. 1518-1521, 2010.

148.C.J Cheng, C.T Feng, M.Z. Atashbar “The Analysis of IgG-Protein a Binding Effect by Quartz Crystal Microbalance Biosensor” IEEE Sensors Conference, November 1-4, 2010, Waikoloa, HI, USA, pp. 228-231, 2010.

149.C.J. Cheng, C.T. Feng, M.Z. Atashbar, W. Wlodarski, K. Kantar-Zadeh “Guided SH-SAW Sensing System for Liquid Viscosity Sensing Applications” 13th International Meeting on Chemical Sensors, July 11-14, 2010, Perth, Australia, pp. 171, 2010.

150.V. Venkataraman, M.Z. Atashbar, B Bejcek “Investigation of Capacitive Transducer for Bio/Chemical Sensing” 13th International Meeting on Chemical Sensors, July 11-14, 2010, Perth, Australia, pp. 169, 2010.

151.B.B. Narakathu, M.Z. Atashbar, B. Bejcek “Pico-mole Level Detection of Toxic Biochemical Species Using Impedance Based” 13th International Meeting on Chemical Sensors, July 11-14, 2010, Perth, Australia, pp. 313, 2010.

152.S.G.R. Avuthu, B.B. Narakathu, M.Z. Atashbar, M. Rebros, E Hrehorova, B. Bazuin, D. Fleming, M. Joyce “Printed Capacitive Based Humidity Sensors on Flexible Substrates” 13th International Meeting on Chemical Sensors, July 11-14, 2010, Perth, Australia, pp. 124, 2010.

153.B.B. Narakathu, B.E. Bejcek, M.Z. Atashbar “Impedance based electro-chemical biosensors” IEEE SENSORS 2009 Conference – October 25-28, 2009, Christchurch, New Zealand, pp. 1212-1216, 2009.

154.C.J. Cheng and M.Z. Atashbar “Three dimensional finite element modeling and simulation of quasi-shear mode resonator based on c-axis-titled ZnO film” IEEE SENSORS 2009 Conference – October 25-28, 2009, Christchurch New Zealand, pp. 1072-1076, 2009.

155.C.J. Cheng and M.Z. Atashbar “Finite element simulation of SMFBAR based sensor” IEEE EIT conference 2008, IEEE Proceedings, May 18-20, 2008, Ames, IA, pp 190-195, 2008.

156.N. Ghafouri, H. Kim, M.Z. Atashbar, K. Najafi “A microscale thermoelectric energy scavenger for a hybrid insect” The 7th IEEE Conference on Sensors October 26-29, 2008, Lecce, Italy, pp. 1249-1252, 2008.

157.M.Z. Atashbar, A.Z. Sadek, K. Kalantar-zadeh, W. Wlodarski, R.B. Kaner “Layered SAW gas sensor based on CSA doped polyaniline nanofiber/AlN/64º YX-LiNbO3 for H2 sensing” 12th International Meeting on Chemical Sensors, July 13-16, 2008, Columbus, Ohio, pp 163-164, 2008.

158.C.J. Cheng and M.Z. Atashbar “Finite element simulation of film bulk acoustic resonator based sensor” Asia-Pacific Conference on Transducers and Micro-Nano Technology 2008. The 4th APCOT Conference. June 22-25, 2008, Tainan, Taiwan, pp. 29-32, 2008.

159.E.E. Aktakka, H. Kim, M.Z. Atashbar , and K. Najafi “Mechanical energy scavenging from flying insects” Solid-State Sensors, Actuators, and Microsystems Workshop, June 1 – 5, 2008, Hilton Head, South Carolina, pp.382-383, 2008.

160.S. Krishnamurthy, M.Z. Atashbar, K. Kalantar-zadeh “3D Modeling and Simulation of SH-SAW Devices Using the Finite Element Method” The sixth International IEEE conference on Sensors, October 28 – 31, 2007, Atlanta, pp. 357-359, 2007.

161.M.Z. Atashbar, B.E. Bejcek, K. Anderson “Portable Prostate Cancer Detection System” Innovative Minds in Prostate Cancer Today – IMPaCT meeting on September 5-8, 2007, Atlanta, Georgia, 2007.

162.C. Baratto, G. Faglia, G. Sberveglieri M.Z. Atashbar, E. Hrehorova “Poly, 3-hexylthiophene-ZnO Nanocomposites For Novel Organic-Inorganic Hybrid Sensor ” 2007 MRS Spring Meeting, 2007.

163.M.Z. Atashbar, C. Baratto, G. Faglia, G. Sberveglieri “Functionalized Single Wall Carbon Nanotubes Based Gas Sensor” IEEE Sensors Conference 2006, October 22 – 25, 2006, Daegu South Korea, pp. 247 – 250, 2006.

164.M.Z. Atashbar, E. Hrehorova, C. Baratto, G. Faglia, G. Sberveglieri “Investigation on Novel Poly, 3-hexylthiophene-ZnO Nanocomposite Thin Films Gas Sensor” IEEE Sensors Conference 2006, October 22 – 25, 2006, Daegu South Korea, pp. 452-455, 2006.

165.S. AbuBakr, A. Al-Fuqaha, R. Aravamuthan, M.Z. Atashbar, K. Bafna, J. Kamman, S. Yahia, S. Van Dyken “Development of Curriculum and International Experience to Prepare Engineers for the New Global Market” Fifth ASEE Global Colloquium on Engineering Education, October 8-12, 2006, Rio de Janeiro, Brazil, 2006.

166.M.Z. Atashbar, K. Kalantar-zadeh, S.J. Ippolitto, W. Wlodarski “Palladium Nanowire Hydrogen Sensor Based on a SAW Transducer” IEEE SENSORS conference 2005, October 30.- November 3, 2005, Irvine, CA, pp. 1363-1365, 2005.

167.M.Z. Atashbar, “Investigation on temperature dependence of `G’ band peak of SWNT” MRS 2005 Fall meeting, Boston, MA, November. 28 –December 2, 2005.

168.K. Kalantar-zadeh, M.Z. Atashbar, S.J. Ippolitto, W. Wlodarski “A Layered SAW Sensor Based on Pd Nanowires” IEEE Frequency Control Conference, Vancouver, Canada, August, 2005.

169.K. Haisch, M.Z. Atashbar, B.J. Bazuin “Identification of acoustic wave modes in piezoelectric substrates” IEEE/ EIT May 22-25, 2005, Lincoln, Nebraska, pp.5, 2005.

  1. S. Krishnamurthy, B.J. Bazuin, M.Z. Atashbar “Wireless SAW Sensors Reader: Architecture and Design” IEEE/ EIT May 22-25, 2005 Lincoln, Nebraska, pp. 6, 2005.
  2. L. Dong and M.Z. Atashbar “An FPGA Experience in ASIC Design” Proceedings of the 2005 ASEE North Central Conference, April 7-8, 2005, pp. PM.1-1-8, 2005.
  3. M.Z. Atashbar, V. Blizynuk, S. Singamaneni “Manipulation of nickel nanoparticles deposited on HOPG” Fabrication and New Applications of Nanomagnetic Structures, edited by J-P. Wang, P.J. Ryan, K. Nielsch, and Z. Cheng, Mater. Res. Soc. Symp. Proc. 853E, Warrendale, PA, 2005, pp. I5.9.1-I5.9.6., 2004.
  4. M.Z. Atashbar, B. Bejeck, S. Singamaneni “SWNT Network for biomolecule detection” in Functional Carbon Nanotubes, edited by D.L. Carroll, B. Weisman, S. Roth, and A. Rubio, Mater. Res. Soc. Symp. Proc. 858E, Warrendale, PA, 2005, pp. HH14.8.1- HH14.8.6, 2005.
  5. M.Z. Atashbar, B. Bejcek, S. SingamaneniCarbon nanotube based biosensors” IEEE Sensor conference, Vienna, Austria, Oct. 24th-27th, 2004, pp. 1048 – 1051, 2004.
  6. M.Z. Atashbar, B. Bazuin, M. Simpeh, S. Krishnamurthy “3-Dimensional finite-element simulation of acoustic wave propagation of SAW metallic thin film gas sensors” Eurosensors 2004, Rome, Italy, September 13-15, pp. 700-701, 2004.
  7. M.Z. Atashbar, Min-Feng Yu, X. Chen “Investigation on G2O3 nanowire for sensing application” Eurosensors 2004, Rome, Italy, September 13-15, pp. 120-121, 2004.
  8. M.Z. Atashbar, D. Banerji, S. Singamaneni “Room temperature gas sensor based on metallic nanowires” Eurosensors 2004, Rome, Italy, September 13-15, pp. 332-333, 2004.
  9. M.Z. Atashbar, B. Bejcek, A. Vijh, S. Singamaneni “Sensitivity enhancement of QCM iosensor with polymer treatment” 2004 IEEE International Ultrasonics, Ferroelectrics and Frequency Control, 23-27th August 2004 1, pp. 329-332, Monntreal, Canada, 2004.
  10. M.Z. Atashbar, B.J. Bazuin, M. Simpeh, S. Krishnamurthy “3-D finite-element simulation model of SAW palladium thin film hydrogen sensor” 2004 IEEE International Ultrasonics, Ferroelectrics, and Frequency Control, August 23-27 2004 pp. 549-553, Monntreal, Canada, 2004.
  11. M.Z. Atashbar, B. Bejcek, A. Vijh, S. Singamaneni “Piezoelectric biosensor for prostate cancer detection” 4th Annual Symposium of Michigan Prostate Research Colloquium, Van Andel Research Institute, Grand Rapids, MI, May 1, 2004.
  12. M.Z. Atashbar and T. Sarma “Application Specific Integrated Circuit design course at WMU” ASEE, North central conference, Conference proceedings Session 1B, Kalamazoo, April 2004.
  13. M.Z. Atashbar, D. Banerji, S. Singamaneni, V. Bliznyuk “Polystyrene palladium nanocomposite for hydrogen sensing” 5th International Conference Electronic Processes in Organic Materials, Kyiv, Ukraine, May 24–29, pp. 201-202, 2004.
  14. M.Z. Atashbar, V. Bliznyuk, D. Banerji, S. Singamaneni “Deposition and manipulation of nickel nanoparticles” International Conference on Intelligent Sensing and Information Processing, 4-7th January 2004, Chennai, India, pp. 258-261, 2004.
  15. B.J. Bazuin, M.Z. Atashbar, S. Krishnamurthy “A prototype burst transceiver for SAW sensors interrogation” International Conference on Intelligent Sensing and Information Processing, 4-7th January 2004, Chennai, India, pp. 190-195, 2004.
  16. M.Z. Atashbar, D. Banerji, S. Singamaneni “Hydrogen sensor based on palladium nanowire array” International Conference on Intelligent Sensing and Information Processing, 4-7th January 2004, Chennai, India, pp. 185-189, 2004.
  17. M.Z. Atashbar, D. Banerji, S. Singamaneni “Palladium nanowire hydrogen sensors” IEEE Sensors 2003, October 21-24, 2003, Toronto, Canada, pp. 195-200, 2003.
  18. M.Z. Atashbar, B.J. Bazuin, S. Krishnamurthy “Design and simulation of SAW sensors for wireless sensing” IEEE Sensors 2003, October 21-24, 2003, Toronto, Canada, pp. 584-589, 2003.
  19. T. Sarma, M.Z. Atashbar, H. Mousavinezhad “Incorporating software engineering principles into real time engineering courses” 33rd ASEE/IEEE FIE conference, Boulder, Colorado, November 5-8th, pp. S1C1- S1C5, 2003.
  20. M.Z. Atashbar, H. Krishnamurthy, J.W. Gesink “Modeling of surface acoustic wave propagation in Anisotropic Multilayered structures using Matrix Approach” IEEE/EIT Conference, Indianapolis, Indiana, June 5-6 2003, Session 7A, Conference Proceedings, 2003.
  21. M.Z. Atashbar, B.J. Bazuin, S. Krishnamurthy “Design steps for SAW devices for wireless applications” IEEE/EIT Conference, Indianapolis, Indiana, June 5-6 2003, Session 7A, Conference Proceedings, 2003
  22. B.J. Bazuin, M.Z. Atashbar, S. Krishnamurthy “A prototype burst transciever for smart SAW sensors” IEEE/EIT Conference, Indianapolis, Indiana, June 5-6 2003, Session 4C, Conference Proceedings, 2003.
  23. T. Sarma, M.Z. Atashbar, H. Mousavinezhad “Real time engineering systems course; methods for self assessment and evaluation” American Society of Engineering Education, Spring 2001 Conference, Nashville, Tennessee, June 22-25th, Paper 2050, 2003.
  24. T. Sarma, M.Z. Atashbar, H. Mousavinezhad “Software engineering principles incorporated into real time systems course with practical applications” ASEE North Central Meeting, Ohio State University, April 13-14, pp. 96-107, 2003.
  25. M.Z. Atashbar, Min-Feng Yu, X. Chen “Investigation and characterization of b-Ga2O3 nano-wire for gas sensing applications” IEEE Sensors 2002, the first IEEE conference on sensors, Orlando, FL, USA, June 12-14, 2002.
  26. M.Z. Atashbar, D. Miller, F. Severance, R. Tanner “Bridging the freshman engineering gap by building mobile robots” American Society of Engineering Education, Spring 2001 Conference, Montréal, Canada, June 16-19, 2002.
  27. M.Z. Atashbar, H. Mousavinezhad, H. Ogunleye “An essential course for electrical and computer engineering majors: engineering real time systems” American Society of Engineering Education, Spring 2001 Conference, Montréal, Canada, June 16-19, 2002.
  28. R. Tanner, W. Mitchell, M.Z. Atashbar, D. Miller “Undergraduate experiments with mobile robots” American Society of Engineering Education Conference, Montréal, Canada, June 16-19, 2002.
  29. F.Severance, D. Miller, I. Abdel-qader, M.Z. Atashbar “Mobile robot summer institute” American Society of Engineering Education Conference, Montréal, Canada, June 16-19, 2002.
  30. M.Z. Atashbar “Nano-sized TiO2 thin film for alcohol sensing application” IEEE-NANO 2001, Hawaii, Oct. 28th-30th, pp. 544-549, 2001.
  31. K. Kalanatar-zadeh, A.Trinchi, W. Wlodarski, A. Holland, M.Z. Atashbar “A novel SAW love mode device with nanocrystalline ZnO film for gas sensing applications” IEEE-NANO 2001, Hawaii, October. 28-30, pp. 556-561, 2001.
  32. M.Z. Atashbar, I. Abdel-Qader, A. Bab-Hadiashar “Real time edge detection implementation” IEEE Electro/Information Technology conference, Oakland university, Detroit, USA, June 6 –8, Session TE 303, 2001.
  33. J. Khazaai, F. Severance, M.Z. Atashbar “Optical edge detection enhancement based on edge pattern and fuzzy logic” IEEE Electro/Information Technology conference, Oakland university, Detroit, USA, June 6 – 8, Session FM 402, 2001.
  34. M.Z. Atashbar “Introduction to microprocessor an essential course for electrical and computer majors” American Society of Engineering Education, Spring 2001 Conference, Cleveland State University, Ohio, USA, April 6-7, Session II.4, 2001.
  35. M.Z. Atashbar “Structure and oxygen sensing properties of the sol-gel prepared nano-sized TiO2 thin films” Material Research Society, Spring 2000 Meeting, San Francisco, California, April 24-28, pp. 448, 2000.
  36. M.Z. Atashbar and L. Tobos “Introductory X86 assembly programming open door to career opportunities” American Society of Engineering Education, Spring 2000 Conference, Michigan State University, E. Lansing, Michigan, USA, March 31 - April 1, Session 302, 2000.
  37. F. Severance and M.Z. Atashbar “Engineering of real time systems: A new course for electrical and computer engineering majors” American Society of Engineering Education, Spring 2000 Conference, Michigan State University, E. Lansing, Michigan, March 31 - April 1, Session 302, 2000.
  38. K. Kalantar-zadeh, M.Z. Atashbar, W. Wlodarski, K. Galatsis “Comparison of sensitivities of acoustic wave devices for sensing chemical components in liquid media” IEEE Electro/Information Technology conference, Chicago, USA, June 8 – 11, Session 106, 2000.
  39. M.Z. Atashbar, F. Severance, H. Mousavinezhad “Simulation of a surface acoustic wave oxygen sensor” IEEE Electro/Information Technology conference, Chicago, USA, June 8 – 11, Session 105, 2000.

209.J. Khazaai, F. Severance, M.Z. Atashbar “Edge detection based on quadruple child windowing and fuzzy logic” IEEE Electro/Information Technology conference, Chicago, USA, June 8 – 11, Session 204, 2000.

210.M.Z. Atashbar, S. Gangadharan, V.K. Varadan, V.V. Varadan, R. Hollinger “Wireless surface acoustic wave based humidity sensor” SPIE’s International Symposium on Micromachining and Microfabrication, 20-23 Sept., Santa Clara, USA, Proceedings of SPIE Vol. 3876, 1999.

  1. G. Sberveglieri, M.Z. Atashbar, W. Wlodarski, G. Faglia, E. Comini, M.K. Ghantasala, Y. Li “Sol-gel prepared nanosized TiO2 thin films for alcohol sensing” The 10th International Conference on Solid-State Sensors and Actuators, Sendai, Japan, pp. 1690-93, June 7-10, 1999.
  2. W. Wlodarski, C. Cantalini, G. Sberveglieri, Y.Li, G. Faglia, M. Passacantando, S. Santucci, M.Z. Atashbar “Ozone sensing properties of WO3 thin films prepared by different methods” The 10th International Conference on Solid-State Sensors and Actuators Sendai, Japan, pp. 150-153, June 7-10, 1999.
  3. M.Z. Atashbar and C.W. Hunt “The design and fabrication of a RF feedback amplifier” The Pennstate university technical report, June, 1999.
  4. V.K. Varadan, V.V. Varadan, S. Gangadharan, J.A. Kollakompil, M.Z. Atahsbar “Love-wave ice sensor” SPIE’s 6th Annual International Symposium on Smart Structures and Material, California USA, SPIE Proceedings Vol. 3673, pp. 287-295, March 1-5, 1999.
  5. V.K. Varadan, V.V. Varadan, S.Gangadharan, J.A. Kollakompil, M.Z. Atahsbar “Strain based SAW Accelerometer” SPIE’s 6th Annual International Symposium on Smart Structures and Material, California USA, March 1-5, 1999.
  6. V.K. Varadan, P. Xavier, V.V. Varadan, D. Suh, M.Z. Atashbar, K.A. Jose “MEMS-IDT-based accelerometers and gyroscopes” SPIE’s 6th Annual International Symposium on Smart Structures and Material, SPIE Proceedings, 3673, pp. 182-189, California USA, March 1-5, 1999.
  7. M.Z. Atashbar , W. Wlodarski, M. K. Ghantasala, B. Gong, R. Lamb “XPS, RBS, XRD and SEM study of the oxygen sensitive, nanosized TiO2 thin films prepared by sol-gel process” The 7th International Meeting on Chemical Sensors, Beijing, China, pp. 449-451, July 27-30, 1998.
  8. M.Z. Atashbar, B. Gong, H.T. Sun, W. Wlodarski, R.N. Lamb “XPS and SEM microstructural characterization of ozone sensitive indium oxide thin films” The 7th International Meeting on Chemical Sensors, Beijing, China, pp. 386-388, July 27-30, 1998.
  9. G. Sberveglieri, M.Z. Atashbar, W. Wlodarski, G. Faglia, E. Comini “Alcohol sensing properties of nanosized TiO2 thin film prepared by sol-gel process” The 7th International Meeting on Chemical Sensors, Beijing, China, pp. 657-659, July 27-30, 1998.
  10. Z.H. Chen, H.T. Sun, M.Z. Atashbar, W. Wlodarski, “The development of Quartz crystal conductivity sensor with innovative electrodes” The 7th International Meeting on Chemical Sensors, Beijing, China, pp. 601-603, July 27-30, 1998.
  11. M.Z. Atashbar, Y. Li, M.K. Ghantasala, W. Wlodarski “Characterization of sol-gel prepared WO3 thin films as a gas sensor” American Vacuum Society 45th International Symposium, Baltimore, Maryland, USA, November 2-6, 1998..
  12. Y. Li, M.Z. Atashbar, M.K. Ghantasala, W. Wlodarski, M. Austin “Nanocrystalline TiO2 Thin Films for O2 Sensing” Conference on Optoelectronic and Microelectronic Materials and Devices, pp. 310-313, Perth, Australia, December 14-17., 1998.
  13. G. Sberveglieri, M.Z. Atashbar, W. Wlodarski, G. Faglia, E. Commini “Alcohol sensor based on nano-sized TiO2 thin film” Conference on Optoelectronic and Microelectronic Materials and Devices, pp. 302-305, Perth, Australia, December 14-17., 1998.
  14. C. Cantalini, S. Santacci, Y. Li, M.Z. Atashbar, W. Wlodarski “High Vacuum Thermally Evaporated WO3 Thin Film Sensor for Ozone Measurement” Conference on Optoelectronic and Microelectronic Materials and Devices, pp. 298-301, Perth, Australia, December 14-17., 1998.
  15. Y. Li, M.Z. Atashbar, M.K. Ghantasala, C. Cantalini, W. Wlodarski, S. Santacci “WO3 Thin Films Prepared by Sol-gel Process for Ozone Sensing” Conference on Optoelectronic and Microelectronic Materials and Devices, pp. 306-309, Perth, Australia, December 14-17., 1998.
  16. M.Z. Atashbar and W. Wlodarski “Design, fabrication of doped TiO2-coated surface acoustic wave oxygen sensor” Proceedings of SPIE in Smart Materials, Structures, Integrated Systems, 3241, Adelaide, Australia, December 11-13, pp. 486-492, 1997.
  17. M.Z. Atashbar, M.K. Ghantasala, W. Wlodarski “Characterisation of sol-gel prepared TiO2 thin film for O2 sensing” Proceedings of SPIE in Smart Materials, Structures, and Integrated Systems, 3241, Adelaide, Australia, December 11-13, pp. 382-388, 1997.
  18. M.Z. Atashbar and W. Wlodarski, “Modelling of a conductivity-based surface acoustic wave oxygen sensor” MICRO‘97, Melbourne, Australia, September 29 - October1 , pp. 134-139, 1997.
  19. M.Z. Atashbar, A. Campitelli, H. T. Sun, W. Wlodarski “Development of TiO2-coated surface acoustic wave oxygen sensor” Proceeding of the 11th European Conference on Solid-State Transducers, Warsaw, Poland, September 21-24, pp. 427-430, 1997.
  20. M.Z. Atashbar, H.T. Sun, W. Wlodarski “TiO2 film prepared by sol-gel method for oxygen microsensor applications” IEEE Proceedings of Conference on Optoelectronic and Microelectronic Materials and Devices, Canberra, Australia. December 8-11 pp. 478-490, 1996.

 

Thesis:

1.       M.Z. Atashbar “Surface Acoustic Wave, SAW Oxygen Sensor Based on Nanosized TiO2 Thin Film”, PhD Thesis, RMIT University Press, Melbourne, Australia, 1998.

2.       M.Z. Atashbar “Design and Fabricating of a Microprocessor Based Programmable Speed Controller”, MSc Thesis, Sharif University of Technology Press, Tehran, Iran, 1992.

3.       M.Z. Atashbar “Computer Analysis of Load Flow in Power Systems”, Isfahan University of Technology Press, Isfahan, Iran, 1989.

Invention:

1. “Wireless and/or Build in RF MEMS-IDT Based Gyroscopes” Pennstate University invention disclosure No. 99-2062.

2.          M.Z. Atashbar and B. Bazuin “Integrated Smart Wireless SAW Sensors and Systems on a chip” Western Michigan University invention disclosure on April 12th 2003.

3.       M.Z. Atashbar and B. Bejcek “Integrated Microsystem for Detection of Proteins in Liquid Solution” Western Michigan University , 2008, US Patent number 8,510,056.

4.       M.Z. Atashbar, E. Hrehorova, C. Baratto, G. Faglia, G. Sberveglieri “Poly(3-hexylthiophene-ZnO Nanocomposite Thin Films Gas Sensor” Western Michigan University on July 14th 2006, Pa

5.       M.Z. Atashbar and B.B. Narakathu, “Flow Cell with Integrated Microfluidic Flow Channel and Electrical Probes” Western Michigan University, Intellectual Property Disclosure, WMU CASE# 2011-002.

6.       M.Z. Atashbar and B.B. Narakathu, “Novel Method of Fabricating a Flexible Capacitive Pressure Sensing System Using Traditional Printing Techniques” Western Michigan University, Intellectual Property Disclosure, WMU CASE# 2012-011.

7.       M.Z. Atashbar and B.B. Narakathu, “Development of a Flexible Microfluidic Sensing Device by Integrating Printed Electrodes with Microfluidic Channels Fabricated Using Conventional Printed Circuit Board, PCB Technology” Western Michigan University, Intellectual Property Disclosure, WMU CASE# 2013-005.

8.       M.Z. Atashbar and B.B. Narakathu, “Development of a Novel Flow Cell for Opto-Electrochemical Based Dual Detection of Biochemical Compounds” Western Michigan University, Intellectual Property Disclosure, WMU CASE# 2013-012.

9.       M.Z. Atashbar, B. Bejeck “Method and integrated microsystem for detecting biomolecules in liquid” US patent #8,510,056.

10.    M.Z. Atashbar and B.B. Narakathu, “Microfluidic Systems with Microchannels and a Method of Making the Same”, International Publication WO 2015/038767 A1, U.S. Patent Application 20160220995, March 19, 2015.

11.    M.Z. Atashbar, M.K. Joyce, B.B. Narakathu, A.S.G. Reddy, A. Eshkeiti and M. Joyce, “Smartphone based Fully Printed and Flexible Impact Sensing System” Western Michigan University, Intellectual Property Disclosure, WMU CASE# 2014-012.

12.    M.Z. Atashbar, M.K. Joyce, B.B. Narakathu, A.S.G. Reddy, A. Eshkeiti and M. Joyce, “Helmet Impact Monitoring System”, United States Patent Publication US 2016/0050999 A1, February 25, 2016.

13.    M.Z.Atashbar, Dinesh Maddipatla, B.B. Narakathu “Opto-Electrochemical Based Dual Detection of Glucose on Printed Paper Substrates”,  Western Michigan University, Intellectual Property Disclosure, WMU 2016-016.

14.    M.K. Joyce, M.J. Joyce, A. Eshkeiti, M.Z. Atashbar, P. D. Fleming “Self-supported electronic devices” United States Patent Publication US WO2016019223 A1, February 4, 2016.

15.    M.Z. Atashbar, B.B. Narakathu, A. Eshkeiti, A.S.G. Reddy, "Fully Printed and Flexible Piezoelectric Based Touch Sensitive Skin” Western Michigan University, Intellectual Property Disclosure, WMU Case# 2016-009.

16.    M.Z. Atashbar, A.A. Chlaihawi, B.B. Narakathu, A. Eshkeiti, "Development of Flexible Dry ECG Electrodes Based on MWCNT/PDMS Composite” Western Michigan University, Intellectual Property Disclosure, - WMU Case# 2016-008.

17.    M.Z. Atashbar, A.S.G. Reddy, B.B. Narakathu, "Detection of Heavy Metal Ions Using Screen Printed Wireless LC Sensor” -WMU Case# 2016-007.

18.    M.Z. Atashbar, A. Eshkeiti, B.B. Narakathu, A.S.G. Reddy "Development of Tattoo-Like, Wearable and Stretchable Sensors for Human Body Movement Measurements” - WMU Case# 2016-006.

19.    M.Z. Atashbar, A. Eshkeiti, B.B. Narakathu, A.S.G. Reddy "Development of Fully Printed, Flexible, Stretchable and Multi-Functional Wearable Sensors” - WMU Case# 2016-005.

20.    M.Z. Atashbar, A.A. Chlaihawi, B. Bazuin, B.B. Narakathu and S. Emamian, “Fully Printed and Flexible Magnetoelectric Thin Film Sensor”, Western Michigan University, Intellectual Property Disclosure, WMU CASE# 2016-020.

21.    M.Z. Atashbar, B.B. Narakathu, A. Eshkeiti and M.M.M. Ali, “Silver Nanowire/Silver Flake Composite Based Printed Strain Sensor on Flexible and Stretchable TPU Substrate”, Western Michigan University, Intellectual Property Disclosure, WMU CASE# 2016-021.

22.    M.Z. Atashbar, A.A. Chlaihawi, B. Bazuin, B.B. Narakathu and S. Emamian, “Printed and Flexible Magneto-Electric Energy Harvester”, Western Michigan University, Intellectual Property Disclosure, WMU CASE# 2016-022.

23.    D.B. Go, Z. Ramshani, M.J. Johnson,M.Z. Atashbar “Multifunctional Thin Film Coating by Piezoelectric Transformer-Driven Spray”, ND CASE# 16-048, United States Patent Publication US 62/319,775, April 7, 2016.

24.       D.B. Go, Z. Ramshani, M.J. Johnson, M.Z. Atashbar “Piezoelectric Transformer-Driven Electrospray Device” A PCT application was filed 4/7/2017 and published 10/7/2017.

25.    M.Z. Atashbar, B.B. Narakathu, X. Zhang, D. Maddipatla, “Development of a Multi-Channel Stethograph System for Lungs and Heart Sound Analysis”, Western Michigan University, Intellectual Property Disclosure, WMU CASE# 2018-001.

26.    M.Z. Atashbar, D. Maddipatla, B.B. Narakathu, B. Ziaie, M. Ochao, R. Rahimi“A Closed-Loop Chemical Delivery System for Biomedical Applications”, Western Michigan University, Intellectual Property Disclosure, WMU CASE# 2017-015.

27.    M.Z. Atashbar, D. Maddipatla, B.B. Narakathu, B. Ziaie, M. Ochao, R. Rahimi “Ink Formulation for Printing Gas Sensing Luminescent Materials on a Flexible Substrate Using Printing Process”, Western Michigan University, Intellectual Property Disclosure, WMU CASE# 2017-017.

28.    M.Z. Atashbar, D. Maddipatla, B.B. Narakathu, B. Ziaie, M. Ochao, R. Rahimi “Scalable Manufacturing of Flexible Multi-Layer Wound Dressings on Paper Substrates”, Western Michigan University, Intellectual Property Disclosure, WMU CASE# 2017-016.

29.    M.Z. Atashbar, D. Maddipatla, B.B. Narakathu, B. Ziaie, M. Ochao, R. Rahimi “A Flexible Printed Platform for Biocompatible Integration of Optical Sensing Materials”, Western Michigan University, Intellectual Property Disclosure, WMU CASE# 2017-018.         

30.    M.Z. Atashbar, D. Maddipatla, B.B. Narakathu, B. Ziaie, M. Ochao, R. Rahimi “A Re-Usable Cartridge Design for Material Deposition Inkjet Printers”, Western Michigan University, Intellectual Property Disclosure, WMU CASE# 2017-019.

31.    M.Z. Atashbar, D. Maddipatla, B.B. Narakathu, B. Ziaie, M. Ochao, R. Rahimi “A Method for Altering Hydrophobic Paper Surfaces to Make Them Suitable for Printing”, Western Michigan University, Intellectual Property Disclosure, WMU CASE# 2017-020.

32.    M.Z. Atashbar, D. Maddipatla, B.B. Narakathu, B. Ziaie, M. Ochao, R. Rahimi “Ink Formulation for Fabricating a Microfluidic-Based Oxygen Gas Generation Sensor on a Flexible Substrate Using Printing Process”, Western Michigan University, Intellectual Property Disclosure, WMU CASE# 2017-021.

33.    M.Z. Atashbar, D. Maddipatla, B.B. Narakathu, “Generation of Atmospheric Microplasma on Flexible Substrates Using Printing Technologies”, Western Michigan University, Intellectual Property Disclosure, WMU CASE# 2017-022.